Page 87 of 95 FirstFirst ... 37778586878889 ... LastLast
Results 861 to 870 of 950

Thread: ESPixelStick - E1.31 WiFi Pixel Controller

  1. #861
    Join Date
    Aug 2012
    Location
    Charleston, SC
    Posts
    1,060
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Quote Originally Posted by cengiz View Post
    Thanks for the answer,

    V3.0 espixelstick mode DMX512


    There are different stage lights at the workshop Robe brand. Address can be given. No problem when I connect to espixelstick at addresses 1-170. The stage robot does not receive a signal from the dmx to raise the adrese to 171 or higher.

    When I try the same operation with v 2.0 dmx 512 mode espixelstick, all addresses are running smoothly.
    Can you create an issue here so I can track it? I had another user say they were having issues with a higher channel Renard setup as well. I'll need to take a closer look at the serial output code.

  2. #862
    Join Date
    Nov 2009
    Location
    Brisbane - Australia
    Posts
    938
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    I tried to search for this before posting, but couldn't see a reference to it.

    Is there known issue with the ESP-01 module corrupting after being reset by the button? After the reset, I lose wi-fi connectivity and end up with the blue led flashing rapidly.

    I've only tried 2 ESP-01 modules so far and the issue only happened with the one that was not marked. The "AI-Cloud Inside" marked module doesn't suffer from this issue.
    www.da-share.com

  3. #863
    Join Date
    Feb 2009
    Location
    Plymouth, MN
    Posts
    8,992
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    I think it's a production problem. I just received a batch of ESP-01's and I've tried 20 of them at random -- can't program any of them. First time I've ever encountered this issue.

    http://digwdf.com/store/
    The DIGWDF Store will be closing at the end of this year.
    While it's still open, please check us out for blinky-flashy gizmos that nobody else on the planet makes!

  4. #864
    Join Date
    Aug 2012
    Location
    Charleston, SC
    Posts
    1,060
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Quote Originally Posted by David_AVD View Post
    I tried to search for this before posting, but couldn't see a reference to it.

    Is there known issue with the ESP-01 module corrupting after being reset by the button? After the reset, I lose wi-fi connectivity and end up with the blue led flashing rapidly.

    I've only tried 2 ESP-01 modules so far and the issue only happened with the one that was not marked. The "AI-Cloud Inside" marked module doesn't suffer from this issue.
    Yeah, there seems to be a slew of iffy modules out there. Not sure yet, but I would assume dodgy flash chips. I've yet to have any reports on the modules I include with the kits, just reports from people buying modules off eBay and whatnot. If you can, try to get the original AI-Thinker ESP-01 modules. Not the ESP-01S or copies.

  5. #865
    Join Date
    Nov 2016
    Posts
    189
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    You can get the 'bad' ones to work but setting up the configuration BEFORE you program each one. The chips will work but you cant save any changes once they are flashed (The config file gets corrupt after saving and the board will 'crash' on startup until its flashed again)

    In the flash tool, edit the 'config.json' file located in the 'spiffs' folder with a text editor.

    Here is an example:
    {
    "network": {
    "ssid": "Kringle5000",
    "passphrase": "HoHoHo",
    "hostname": "Lights30",
    "ip": [
    192,
    168,
    1,
    30
    ],
    "netmask": [
    255,
    255,
    255,
    0
    ],
    "gateway": [
    192,
    168,
    1,
    1
    ],
    "dhcp": false,
    "ap_fallback": true
    },
    "device": {
    "id": "Lights30"
    },
    "e131": {
    "universe": 8,
    "channel_start": 1,
    "channel_count": 512,
    "multicast": false
    },
    "pixel": {
    "pixel_type": 0,
    "pixel_color": 0,
    "gamma": true
    },
    "serial": {
    "serial_type": 0,
    "baudrate": 57600
    }
    }
    ssid & passphrase = your wifi settings
    IP,netmask & gateway = your network settings (and the IP address you want your espixelstick to have)
    e131 = universe start number, channel & count, multicast
    pixel = pixel_type, pixel_color & gama.

    For pixel_type use:
    0 = WS2811
    1 = GECE

    pixel_color is the color order:
    RGB = 0
    GRB = 1
    BRG = 2
    RBG = 3
    GBR = 4
    BGR = 5

    You'll have to configure and flash each chip you want to use. But they will work.. I used about 3 bad chips in my show this year without an issue.

    Hope that helps.

  6. #866
    Join Date
    Nov 2009
    Location
    Brisbane - Australia
    Posts
    938
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    I might try replacing the flash on the bad ones. Now, to find those spare flash chips I bought 2 years ago ... !
    www.da-share.com

  7. #867
    Join Date
    Dec 2017
    Posts
    32
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    I'm getting squared away.
    Last edited by onceler; 01-14-2018 at 10:31 PM.

  8. #868
    Join Date
    Nov 2013
    Location
    North Carolina
    Posts
    1,510
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Are you referring to the connector that the wires attach to and then plugs into the board? If so,mine all came with them I believe.

    Quote Originally Posted by onceler View Post
    I purchased one which arrived today, however I dont have the female power connector, is that usually included or something that needs to be purchased independently?

    (1)Falcon PI Player (Running the show)
    (1) Falcon F16V3
    (1)E682
    (1)Renard SS24
    (1)E1.31 Bridge
    (1)EDM-LCD-CS-EP
    (20)P10 Panels
    (12)ESPixel Sticks (shelby aka sporadic)


    WIKI
    Become A Supporting Member

    Falcon Christmas


  9. #869
    Join Date
    Nov 2016
    Posts
    45
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Are these only available through Amazon now or are there other sources? I didn't know if he went exclusive these days?

  10. #870
    Join Date
    Dec 2017
    Posts
    32
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Quote Originally Posted by Whyintheworld View Post
    Are these only available through Amazon now or are there other sources? I didn't know if he went exclusive these days?
    I purchased mine through Amazon, you have to watch them they will come available then quickly sell out before Amazon officially gets them stocked.

Page 87 of 95 FirstFirst ... 37778586878889 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •