Page 83 of 83 FirstFirst ... 3373818283
Results 821 to 827 of 827

Thread: ESPixelStick - E1.31 WiFi Pixel Controller

  1. #821
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    6,631
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Quote Originally Posted by artem View Post
    My first soldering . First experience homemade DIY

    Attachment 38170

    Two libraries to choose:
    ArtNet - D4 (GPIO2)
    E1.31 - D2 (GPIO4) by http://forkineye.com
    Curious how well that design works for you. That's a lot of wifi radios with their antennas less than a wavelength apart.

  2. Likes CaptClaude liked this post
  3. #822
    Join Date
    Nov 2013
    Posts
    39
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Backer material- Don't know the Russian name, hope it is simpler than ours - Oriented Strand Board -OSB.
    My local carpenters called it aspentite, probably an old brand name for it.

  4. Likes artem liked this post
  5. #823
    Join Date
    Nov 2017
    Location
    Moscow, RU
    Posts
    10
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Quote Originally Posted by davros View Post
    Backer material- Don't know the Russian name, hope it is simpler than ours - Oriented Strand Board -OSB.
    My local carpenters called it aspentite, probably an old brand name for it.
    Yes, Oriented Strand Board -OSB

  6. #824
    Join Date
    Dec 2015
    Location
    Crofton MD
    Posts
    1
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Recently crossed the lines on a t connector while doing some power injection . I blew the fuse on the power distribution board but not on the espixelstick , now the espixelstick won’t start up. I swapped out the esp module to a different board and it still works, but I can’t get it power. Any ideas on where to start to fix the espixelstick?


    Sent from my iPhone using Tapatalk

  7. #825
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    6,631
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    I just did the same thing to one of mine last night. Looks like at least the voltage regulator is fried. Easiest and quickest answer is replace it.

  8. #826
    Join Date
    Dec 2013
    Location
    Huntington Beach, CA
    Posts
    32
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    In the newest firmware, what takes precedence, Universe Boundary, or Pixel Count?

    In last years firmware I just set Pixel Count… What should Universe Boundary be? (it keeps snapping to 512) Am I supposed to do the math?

    joe

    BTW, THANKYOU for this amazing device!!!!

  9. #827
    Join Date
    Aug 2012
    Location
    Charleston, SC
    Posts
    971
    Post Thanks / Like

    Default Re: ESPixelStick - E1.31 WiFi Pixel Controller

    Quote Originally Posted by oceanwanderlust View Post
    In the newest firmware, what takes precedence, Universe Boundary, or Pixel Count?

    In last years firmware I just set Pixel Count… What should Universe Boundary be? (it keeps snapping to 512) Am I supposed to do the math?

    joe

    BTW, THANKYOU for this amazing device!!!!
    In the previous firmware, it was set to 512 internally. It's the point at which it'll start listening for data on the next universe. Thanks!

    Sent from my R1 HD using Tapatalk

Page 83 of 83 FirstFirst ... 3373818283

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •