Results 1 to 5 of 5

Thread: LEDEDIT 2014 & rj-fsd-1000 (T-1000s) Setup

  1. #1
    Join Date
    Oct 2013
    Location
    Mid-Hudson Valley, New York
    Posts
    2
    Post Thanks / Like

    Default LEDEDIT 2014 & rj-fsd-1000 (T-1000s) Setup

    Having an issue with the rj-fsd-1000 controller and file saving to SDcard. For this controller the files are to be saved as .bin. After file saving the SDcard is not being read and the ws2812b's do not light. Not too familiar with progamming so I am sure it is me having the issue.

    The lights respond proper when no SDcard is used and respond when using other controllers (hc008, T-1000s and the cheesy lededit2014-x control).

    When looking at the .bin file on SDcard with factory settings it shows the files set as: 0.bin, 1.bin, 2.bin etc. Saving the file as .bin shows up as: 01permanent.bin. Thought renaming the file to 1.bin works but no.

    Does anyone use the rj-fsd-1000 also?

    Cheers,
    Rob

  2. #2
    Join Date
    Oct 2013
    Location
    Mid-Hudson Valley, New York
    Posts
    2
    Post Thanks / Like

    Default Re: LEDEDIT 2014 & rj-fsd-1000 (T-1000s) Setup

    How can one upload the factory .bin settings from the SD card to lededit2014 to reprogram? If this can happen I can see what the correct settings are.

    This is the current sequence being used;
    Format SD- Fat (default)
    Ws2812b program selected
    1024 pixels selected (only using 219)
    485 output selected instead of AC (is 485 DMX only?)

    When saving to SD;
    Export with .bin selection
    Save .bin file to new folder
    Open new folder and sd drive
    Format SD to FAT(default)
    Copy and paste from new folder on SD drive.

    Now when turning on the controller a P001 code shows dimly lighting. Looks closer now to the file is being read on the card but not in proper format.

  3. #3
    Join Date
    Jan 2016
    Posts
    1
    Post Thanks / Like

    Default Re: LEDEDIT 2014 & rj-fsd-1000 (T-1000s) Setup

    Quote Originally Posted by DreamLED View Post
    How can one upload the factory .bin settings from the SD card to lededit2014 to reprogram? If this can happen I can see what the correct settings are.

    This is the current sequence being used;
    Format SD- Fat (default)
    Ws2812b program selected
    1024 pixels selected (only using 219)
    485 output selected instead of AC (is 485 DMX only?)

    When saving to SD;
    Export with .bin selection
    Save .bin file to new folder
    Open new folder and sd drive
    Format SD to FAT(default)
    Copy and paste from new folder on SD drive.

    Now when turning on the controller a P001 code shows dimly lighting. Looks closer now to the file is being read on the card but not in proper format.
    Try this software:

    http://szrjsc.com/en/the-community.html

  4. #4
    Join Date
    Apr 2016
    Posts
    2
    Post Thanks / Like

    Default Re: LEDEDIT 2014 & rj-fsd-1000 (T-1000s) Setup

    Quote Originally Posted by kateaser View Post
    link doesn't work and I'm having the same problem as mr. Dreamled..
    did you figure out how to export the .bin files correctly ?
    cheeers!
    Phil

  5. #5
    Join Date
    Apr 2016
    Posts
    2
    Post Thanks / Like

    Default Re: LEDEDIT 2014 & rj-fsd-1000 (T-1000s) Setup

    having the same problem has DreamLED...
    have you figure out how to export the bin files properly ?
    cheers
    Phil

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •