Having an issue with the rj-fsd-1000 controller and file saving to SDcard. For this controller the files are to be saved as .bin. After file saving the SDcard is not being read and the ws2812b's do not light. Not too familiar with progamming so I am sure it is me having the issue.

The lights respond proper when no SDcard is used and respond when using other controllers (hc008, T-1000s and the cheesy lededit2014-x control).

When looking at the .bin file on SDcard with factory settings it shows the files set as: 0.bin, 1.bin, 2.bin etc. Saving the file as .bin shows up as: 01permanent.bin. Thought renaming the file to 1.bin works but no.

Does anyone use the rj-fsd-1000 also?

Cheers,
Rob