Page 3 of 16 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 155

Thread: 20W Flood RGB LED driver board (WS2811)

  1. #21
    Join Date
    Nov 2012
    Location
    Cary, NC, US
    Posts
    1,131
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    Started new group buy, #2.

  2. #22
    Join Date
    Nov 2012
    Location
    Cary, NC, US
    Posts
    1,131
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    GB is still on.

  3. #23
    Join Date
    Nov 2012
    Location
    Cary, NC, US
    Posts
    1,131
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    New version of the 20W flood coming soon.
    It will replace the original 20W board as well as all Ren versions.
    What's new? Input can be set to use inverted or non-inverted signal.

    Also in the works is one channel 20W board, which can be used with white, UV, and IR LEDs.
    My goal is to have one universal board which will allow PWM control of white LED, on/off control of UV LED, and data (38kHz carrier) for IR LED.

    new floods.jpg

  4. Likes Sulrich liked this post
  5. #24
    Join Date
    Jul 2008
    Location
    Brandon, SD
    Posts
    240
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    Which housing is everyone using for these 20w versions that's a good choice?
    Just remember. Wireless is nice. Copper is king!

  6. #25
    Join Date
    Dec 2011
    Posts
    5,359
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    Wow are these ever blinding .

    Running at 18v and they are pain full .

  7. #26
    Join Date
    Jul 2008
    Location
    Brandon, SD
    Posts
    240
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    What kind of distance are people getting between floods when they are daisy chaining them. I'm thinking that for what I want to do that I may install a line driver in each case on the output side just as a safety net?
    Just remember. Wireless is nice. Copper is king!

  8. #27
    Join Date
    Aug 2010
    Location
    Wilmington, NC
    Posts
    1,526
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    I have at least 25 foot between a few...no problems

    Sent from my LG-H811 using Tapatalk

  9. #28
    Join Date
    Jul 2008
    Location
    Brandon, SD
    Posts
    240
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    Thanks. That's much better than I thought. I'll build them and test first.
    Just remember. Wireless is nice. Copper is king!

  10. #29
    Join Date
    Jul 2008
    Location
    Brandon, SD
    Posts
    240
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    I was planning on running these 20w using cat5 cable like I do for regular pixels with a central power supply. What I'm not sure is how many I can run of cat5? Or if this is not a good idea how is everyone wiring these for power?
    Just remember. Wireless is nice. Copper is king!

  11. #30
    Join Date
    Nov 2012
    Location
    Cary, NC, US
    Posts
    1,131
    Post Thanks / Like

    Default Re: 20W Flood RGB LED driver board (WS2811)

    I am using Ray's wires and T splitters, see here.
    If you use 4 wires for GND, 3 for V+, and one for signal, you should be able to power few of them, but the distance will be a factor here.
    Floods will work even if the voltage drops down to 20V or less and you can always adjust your 24V PS to output couple more volts.

Page 3 of 16 FirstFirst 1234513 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •