Results 1 to 3 of 3

Thread: Intensity Level question

  1. #1
    Join Date
    Mar 2008
    Posts
    1,609
    Post Thanks / Like

    Default Intensity Level question

    I'm playing with intensity levels on pixels....I found a level using the "Test by manually turning lights ON or OFF" option. Thist is probably a really dumb question...but I thought I'd verify nevertheless.

    If I pick 30% in my "Test manually" option and then go into the sequenced effect (Modify effect) and set the intensity of the effect to 30% intensity level will my output be the same intensity level as the one I came up with when I did the "Test manually"?

    Thanks

    SC

  2. #2
    Join Date
    Dec 2011
    Location
    Huntsville, AL
    Posts
    3,644
    Post Thanks / Like

    Default Re: Intensity Level question

    Yes

  3. #3
    Join Date
    Mar 2008
    Posts
    1,609
    Post Thanks / Like

    Default Re: Intensity Level question

    Thanks Joe....

    I thought so.....Just checking.....since my actual display is put away I couldn't validate.....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •