Results 1 to 4 of 4

Thread: HDPE in Orlando

  1. #1
    Join Date
    Dec 2011
    Posts
    249
    Post Thanks / Like

    Default HDPE in Orlando

    Anyone know who is selling HDPE in the Orlando area. I only need about 8 feet for a special project. Any input is appreciated.

    Thanks!

    R/
    Mike

  2. #2
    Join Date
    Jul 2016
    Location
    Orlando, FL
    Posts
    1
    Post Thanks / Like

    Default Re: HDPE in Orlando

    **Following... In Orlando area too....

    Thx!

  3. #3
    Join Date
    Jan 2014
    Location
    Palm Bay, Florida
    Posts
    1,459
    Post Thanks / Like

    Default Re: HDPE in Orlando

    Try local plumbing contractors, They sometimes have HDPE in stock, I used 1" PEX for my arches, from Home Depot, available in 10 ft lengths.

  4. #4
    Join Date
    Dec 2011
    Posts
    127
    Post Thanks / Like

    Default Re: HDPE in Orlando

    I looked everywhere for it in orlando area and within reasonable driving distance, but had no luck locating minimal qtys. I did have a couple of wholesale houses say they could bring it in for me but It was a large roll and very costly. The best place that you might have some luck is ferguson supply. If any plumbers have been using some they may have pieces. They were the cheapest for a roll last year. Unfortunatly they closed our altamonte branch, so cannot swing in and check there for you. I will try and dig up the other 2 places that I located it at.

    Joe

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •