Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: Help Repairing My Sagging Inflatables - Is Rejuvination Possible ?

  1. #31
    Join Date
    Mar 2017
    Location
    Lancaster OH
    Posts
    184
    Post Thanks / Like

    Default Re: Help Repairing My Sagging Inflatables - Is Rejuvination Possible ?

    Quote Originally Posted by bowl3001999 View Post
    Thank you, I have read about using sealer, fabric softener but never starch. Do you just spray it on the seams? I just wanted to make sure it doesn't leave marks.
    If an inflatable is only sagging a little you can be selective, but I usually spray the entire figure. My thinking is that if you do see a difference in color because of the starch, it will at least be consistent.
    You can use most anything that will fill the fabric pores. In one case I went as far as using clear spray paint. It gave me a noticably shiny surface in daylight, but didn't look bad when lit at night.

    Sent from my Moto Z (2) using Tapatalk

  2. #32
    Join Date
    Jan 2017
    Posts
    303
    Post Thanks / Like

    Default Re: Help Repairing My Sagging Inflatables - Is Rejuvination Possible ?

    I used spray glue on my Winnie The Pooh and Tigger inflatables a few years ago. It took a couple of tries but they inflate nicely now. I turned each one of them on, reached my hand through the zipper with a can of spray glue and tried to hit the areas I thought were leaking more. I also sprayed glue in the middle and let it leak through the fabric. It's messy
    and I should have worn respiratory and skin protection. Some of the glue gets through the small holes and onto your clothes, skin, etc. After the application I let them run for a few days to make sure the glue was dry. I only use 2 inflatables for Christmas and those usually run 24x7.

  3. #33
    Join Date
    Feb 2020
    Posts
    1
    Post Thanks / Like

    Default Re: Help Repairing My Sagging Inflatables - Is Rejuvination Possible ?

    I have a pair of 2003 Gemmy 12.5 foot inflatables that just won't stand up. The fans are large and blow very strong but both are limp noodles. I took the best one and treated all the seams with gooey tent seam sealer and then sprayed the entire inflatable from the inside with silicone waterproofer and nothing. I'd really like to get these working again if there is any way possible as they are of a fantastic design. Any other ideas anyone could share? I tried to add a second but smaller fan and it made absolutely no difference.

  4. #34
    Join Date
    Mar 2017
    Location
    Lancaster OH
    Posts
    184
    Post Thanks / Like

    Default Re: Help Repairing My Sagging Inflatables - Is Rejuvination Possible ?

    If the fans are strong you are obviously losing air somewhere. Sealing the seams and coating the fabric usually solves that problem.
    I can only suggest powering up then going over the inflatable inch by inch feeling for any large unexpected airflow then resealing those areas as needed.

    Sent from my moto z4 using Tapatalk

  5. #35
    Join Date
    Oct 2021
    Posts
    1
    Post Thanks / Like

    Default Re: Help Repairing My Sagging Inflatables - Is Rejuvination Possible ?

    Thanks for all the info. I too have a Gemmy inflatable from the early 2000's that I put up every couple of years for Halloween. It has not seen that much use (time) and worked fine about 2 years ago. I only run mine for about 4 hours a day and don't generally put them up until a week before Halloween. I store them in my garage so they are dry and only exposed to normal external temperatures in Ohio, not so warm. This year I plugged it in and just as everybody else mentions it does not stand all the way up. I immediately thought of the motor or something impeding intake or output of air. Could find no evidence of that. If I gently squeeze and hold the base it will stand all the way up.

    If anyone is more mechanically inclined than I and have tried opening the plastic motor case and oiling it, I would love to hear about it or see a picture of where to add some oil. I do not want to spray it into the unit when operating as I can't see that as being effective to get it to where it is needed and it will coat the inside of the inflatable which I don't think will be beneficial.

    I am going to order some seam sealer and was hoping that I could get some feed back on the motor oiling before it arrives. I would love to put it up for Halloween this year but time is getting short.

    Appreciate any help!!

  6. #36
    Join Date
    Feb 2009
    Location
    Plymouth, MN
    Posts
    9,395
    Post Thanks / Like

    Default Re: Help Repairing My Sagging Inflatables - Is Rejuvination Possible ?

    You might drop by places that sell inflatable pools or marine stores that sell inflatable recreational marine products. They would likely have repair kits specifically for vinyls.

    http://digwdf.org/store/
    Even though the DIGWDF Store has been closed for almost three years, it's still awesome!
    User guides, documentation and other files are still free and available for downloading.

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •