Results 1 to 2 of 2

Thread: Modify Effect Changes Length of Effect On "Change Type"-Only

  1. #1
    Join Date
    Nov 2011
    Location
    Austin, TX
    Posts
    47
    Post Thanks / Like

    Default Modify Effect Changes Length of Effect On "Change Type"-Only

    Joe,

    Here's what I did:

    1) Selected a group of ramp-down effects.
    2) Right-Click, Modify This Effect
    3) Check the Level Radio Button
    4) Check the Change Type Box. All other "Change Effect Parameter" boxes were unchecked.
    5) Clicked on OK

    As expected, all effects in the selection box were changed from ramp-down to level.

    BUT, all effects in the selection box were also shortened to 10 cells, which happened to be the value in the Length of Effect box in the Modify Effect dialog.

    This can be a really big deal if you're changing a large number of effects and they all get shorted (or worse, lengthened to where they overlap).

  2. #2
    Join Date
    Dec 2011
    Location
    Key West, FL
    Posts
    3,633
    Post Thanks / Like

    Default Re: Modify Effect Changes Length of Effect On "Change Type"-Only

    When you switch types multiple properties change like start and stop change also.

    I also had length tied into the modification.

    The next release will remove length unless specifically checked.

    Thanks.

    Version 24A released.

    Joe
    Last edited by JHinkle; 11-24-2014 at 03:46 PM.
    Link to my DownLoad Site: [B][COLOR=#ff0000][URL]http://www.joehinkle.com/HLS[/URL]

    [/COLOR][/B][IMG]http://joehinkle.com/HLS/HLS%20Logo%20Small.jpg[/IMG]

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •