Eagle to Gerber help (again). Can someone convert for me?

**ukewarrior** · 07-09-2014, 11:05 AM

Y E S !
This is great.
Thank you so much.
I had no idea it was so easy.
I can now FISH !!!

It really is hard to describe how a forum like this can make your day.

Originally Posted by budude

No - if you open the job file I provided it should select the device automatically.

Open the .brd file as you normally do
Click File->CAM Processor (or click the 'film strip' icon)
From the CAM Processor box do File->Open and point to the job file I provided
Click on "Process Job" and it should produce all the files
Zip them all up and send off to the PCB house

**kmalsom** · 07-09-2014, 11:44 AM

Build a man a fire, keep him warm for the night.
Set a man on fire, keep him warm for the rest of his life....

**Shockwave** · 07-09-2014, 12:51 PM

You will find that designing boards of your own is a marketable skill, too.

**budude** · 07-09-2014, 02:13 PM

Awesomeness - I suggest you get a Gerber viewer like GerbView or similar (google it) and view the outputs to be sure they are what you want. The lettering is not always exactly as shown in the editor at times because of different font usage, etc. Happy Fishing!

**ukewarrior** · 07-09-2014, 02:13 PM

I've done several boards, for this forum, but not in EAGLE.
However, I come across boards all the time that others have done and shared that I want to order; but the Gerbers aren't posted.
Just another thing off the bucket list...

Originally Posted by Shockwave

You will find that designing boards of your own is a marketable skill, too.