Results 1 to 9 of 9

Thread: configuring Vixen

  1. #1
    Join Date
    Dec 2012
    Location
    Silsbee, Tx
    Posts
    1,096
    Post Thanks / Like

    Default configuring Vixen

    Where do I find the instructions on how to setup the program.
    I finally got it downloaded and extracted. then finally got it to open up. But what has to be done from here to set up parameters. Does the computer have to be plugged into a board? I don't have any hardware yet. Just trying to learn what to do.

    Am I starting off on the wrong foot?
    Last edited by 11Bravo; 12-21-2012 at 01:15 AM.

  2. #2
    Join Date
    Dec 2009
    Location
    Gresham, OR (45.483992, -122.453879)
    Posts
    1,591
    Post Thanks / Like

    Default Re: configuring Vixen

    Welcome to DIYC. You will want to take a peek around in the wiki. Here is probably your best starting point.

  3. #3
    Join Date
    Dec 2012
    Location
    Silsbee, Tx
    Posts
    1,096
    Post Thanks / Like

    Default Re: configuring Vixen

    Thank you pointing me in the right direction.
    Last edited by 11Bravo; 12-21-2012 at 09:28 PM.

  4. #4
    Join Date
    Jan 2009
    Location
    Monroe nc
    Posts
    295
    Post Thanks / Like

    Default Re: configuring Vixen

    this is old but if was helpful for me
    http://doityourselfchristmas.com/for...w-to-use-Vixen

  5. #5
    Join Date
    Oct 2011
    Location
    Albuquerque, NM, US of A.
    Posts
    633
    Post Thanks / Like

    Default Re: configuring Vixen

    Quote Originally Posted by macebobo View Post
    Here is probably your best starting point.
    Amen, its where I started.

  6. #6
    Join Date
    Dec 2012
    Location
    Silsbee, Tx
    Posts
    1,096
    Post Thanks / Like

    Default Re: configuring Vixen

    Thanks, I have been following the videos also. I doubt I could configure it without following them.
    Last edited by 11Bravo; 12-25-2012 at 11:49 AM.

  7. #7
    Join Date
    Sep 2012
    Posts
    12
    Post Thanks / Like

    Default Re: configuring Vixen

    Can anyone tell me what has happened to all the vixen tutorials? When you click on them they say "the video has been deleted!" How can we access the vixen tutorials for all these links?

  8. #8
    Join Date
    Dec 2012
    Location
    Claremore, OK
    Posts
    184
    Post Thanks / Like

  9. #9
    Join Date
    Sep 2012
    Posts
    12
    Post Thanks / Like

    Default Re: configuring Vixen

    Perfect! Those work!
    Thank you!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •