Results 1 to 4 of 4

Thread: e1.31 output status is red

  1. #1
    Join Date
    Dec 2011
    Location
    17363
    Posts
    67
    Post Thanks / Like

    Default e1.31 output status is red

    When configuring my e1.31 output the status stays red. I created a simple sequence for 100 channels on universe 1.
    selected nic (highlighted) presaed ok as there are no options here
    also tried just us default still red
    selected output method and there is only one option there which i setup for e1.31.

    Any ideas what i am doing wrong?

  2. #2
    Join Date
    Jul 2012
    Posts
    132
    Post Thanks / Like

    Default Re: e1.31 output status is red

    have you tried going into manage raw channels and renumber all channels for output first? you also need to select the nic card first. (under output tab)
    [SIGPIC][/SIGPIC]

  3. #3
    Join Date
    Dec 2011
    Location
    Key West, FL
    Posts
    3,621
    Post Thanks / Like

    Default Re: e1.31 output status is red

    You most likely did not press the Green button.

    You only need to select the NIC if you have more than 1 NIC card.

    Joe
    Link to my DownLoad Site: [B][COLOR=#ff0000][URL]http://www.joehinkle.com/HLS[/URL]

    [/COLOR][/B][IMG]http://joehinkle.com/HLS/HLS%20Logo%20Small.jpg[/IMG]

  4. #4
    Join Date
    Dec 2011
    Location
    17363
    Posts
    67
    Post Thanks / Like

    Default Re: e1.31 output status is red

    Quote Originally Posted by BrianJ View Post
    have you tried going into manage raw channels and renumber all channels for output first? you also need to select the nic card first. (under output tab)
    I didn't press the green button :-( thanks for the quick and helpful replies!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •