8 x 8 LED Matrix Panel

[tstewart]

I just ordered some of these 8 x 8 LED Matrix panels to use for my LEDTriks setup. They may be a little small but I was thinking of attempting to make a 2 x 2 setup of them and use 4 LEDTriks boards. Each panel is 2.37" square. It would give a size of 4.74" x 14.22" for one LEDTriks panel. I got a response from the seller and he said the LED's were 2200mcd.

Here is the ebay link.

http://cgi.ebay.com/ws/eBayISAPI.dll...:X:RTQ:US:1123

The panels have a lower current rating then what RJ has designed the LEDTriks board for so the resistor value will have to be changed in order to use them.


Todd Stewart

[tstewart]

I received the panels today and they look pretty nice. The LED's are on 5/16" centers so one LEDTrik panel has an overall dimension of 4 3/4" x 14 1/4". I have not powered one up yet to see how bright the LED's are but I will soon. My overall plan is to build a 2 x 2 setup to see how it works. Once I receive my first two LEDTrik boards I am going to build one up and see how good these work. If I can find a way to take a video I will.

[Wombat]

im thinking of using these ones.
http://cgi.ebay.com/ws/eBayISAPI.dll...TODAY.m238.lVI

They are similiar in size but they are Bi Colour Red / Green

Wombat

[tstewart]

im thinking of using these ones.
http://cgi.ebay.com/ws/eBayISAPI.dll...TODAY.m238.lVI

They are similiar in size but they are Bi Colour Red / Green

Wombat

I was originally looking at those also but they are a lot smaller than the ones I ended up getting. I think the ones I have may end up being to small for a LEDTrik but I am going to try it. The ones I got are 5mm LED's and the overall size is 60.2mm square. The bi-color ones are 3mm LED's and the overall size is 32mm square.


Todd

[Wombat]

yeh they are small I was thinking of tieing two pixels together making them 4 LED's per pixel I wonder if that would work ok..depends I may have to put resistors in each leg to ballance out any voltage differences of the leds

Wombat

[ppohlman]

Interesting idea of tieing the pixels together. Let me know how that goesif you test it.