Post Enclosure Pics Thread

**rfallatt** · 05-18-2012, 10:02 PM

I saw this somewhere else, but can't find it.
It would be nice to see how people are using enclosures. This could be a good thread for reference on what is possible for which boards/setups.

I am posting possible setups for my Ren 48LSD + PS + BOBs (Break Out Boards)Looking for feeback on what looks correct/incorrect or will or will not work.

I do not know how I am going to mount the components yet, but if others post their pictures of boards mounted to enclosures here, it could be a good source for information for me and all newbies.
Option I
GC2000 + 48 +PS + BOB.jpg

Option II
GC2000 + 48 +PS + BOB a.jpg

Option III
BOB's in a TA200
TA 200 + BOB.jpg
TA 200 + BOBa.jpg

**barbotte** · 05-18-2012, 10:14 PM

that is a good idea of a tread as there a many way of doing thing ... i try with a cg2000 and 1500 but i thing i will be using a plastic tool box for my lsd+ ps+ BOB....i will upload picture wen i am done tomorow i hope ..
cheer

**dirknerkle** · 05-18-2012, 10:54 PM

I think you'll find that the TA200 case will be wayyyyyy too small for all the wires that you'll need and the closeness of the connectors will be problematic. You can only bend cat5 cable so far before it pulls on the connectors and creates very hard-to-find connectivity problems. The breakout boards may "fit" inside, but you'll need a lot more wiggle room than they will provide.

Often, you'll find the "coolest" looking installations are anything but a hopeless tangle of wires. They're laid out very orderly, often using cable ties to keep them bound together with good markings throughout.

**air_run** · 05-19-2012, 12:46 AM

Here is how I do mine. CG-1000's and TA-200's. ...oh, and some electrical panels.

DSC_0253.jpg DSC_0255.jpg

**Wayne J** · 05-19-2012, 02:10 AM

Originally Posted by air_run

here is how i do mine. Cg-1000's and ta-200's. ...oh, and some electrical panels.

DSC_0253.jpg DSC_0255.jpg

DUDE!!!!!!! Come to my house!

**BillinSoFL** · 05-19-2012, 07:19 AM

That's absolutely beautiful! Wow. I think the more important question is how long did it take you to get that organized?

**pmcpa** · 05-19-2012, 08:54 AM

That is AMAZING!!! 1ST PLACE!

**gdyrdave** · 05-19-2012, 09:55 AM

Originally Posted by air_run

Here is how I do mine. CG-1000's and TA-200's. ...oh, and some electrical panels.

DSC_0253.jpg DSC_0255.jpg

HOUSTON,,,,,, WE ARE GO FOR LAUNCH !!!! An electrician after my own heart. Very WELL DONE !

**barbotte** · 05-19-2012, 10:00 AM

Originally Posted by air_run

Here is how I do mine. CG-1000's and TA-200's. ...oh, and some electrical panels.

DSC_0253.jpg DSC_0255.jpg

WOW very impressive .. now i am ashame of showing my set up lol

**Skunberg** · 05-19-2012, 10:29 AM

Beautifully done. Very professional. But SSR's lean themselves to being out in the yard to cut down on extension cords. If you used Ren24's or Ren24SS controllers you could double or triple your channel count on the same wall space and eliminate almost all the patch cords. I'm not down playing your setup at all! I'm just curious about how you got to this setup?

Brian