Results 1 to 6 of 6

Thread: Anyone using this controller

  1. #1
    Join Date
    Jan 2012
    Posts
    25
    Post Thanks / Like

    Default Anyone using this controller

    Is anyone using this controller with vixen? If so I need help!!!!

    https://www.audiovisualdevices.com.a...d=USB485RJ-ISO

  2. #2
    Join Date
    Oct 2008
    Location
    San Jose, CA
    Posts
    8,831
    Post Thanks / Like

    Default Re: Anyone using this controller

    You'll want to PM member David_AVD - he's the creator of that - although it doesn't appear to be a controller - more like a USB-DMX dongle.
    Brian

    Christmas in San Jose! - WEB - FB - VIDEOS
    Halloween in San Jose! - FB
    2014 Halloween Show - Homemade tombstones, Grave Crawler, 2x 3-axis skulls, 4x 1-axis skulls, Video Projection (more)
    2014 Christmas Show - 5x E681-12, 3x Ren48LSD, 32x42 TLS3001 pixel MT/Star, 4x Rainbow Floods, 12x DIYC Floods, SuperPixelStar, PixaBulb House outline

    Ignorance is Temporary - Stupidity is Forever...

  3. #3
    Join Date
    Jan 2012
    Posts
    25
    Post Thanks / Like

    Default Re: Anyone using this controller

    Already spoken to David but need to know if it will work with vixen.

  4. #4
    Join Date
    Oct 2008
    Location
    San Jose, CA
    Posts
    8,831
    Post Thanks / Like

    Default Re: Anyone using this controller

    Well.... if he doesn't know then - well... If it truly emulates either an Enttec Open or Enttec Pro then it "should" work but again David should be able to tell you - I would hope if he sells something purported to work with Vixen that he tested it! When you plug it in, it should enumerate in Windows (gives the little ding-dong sound) and shows up as a COM port in Windows. You then assign the plug-in in Vixen to use that COM port.
    Brian

    Christmas in San Jose! - WEB - FB - VIDEOS
    Halloween in San Jose! - FB
    2014 Halloween Show - Homemade tombstones, Grave Crawler, 2x 3-axis skulls, 4x 1-axis skulls, Video Projection (more)
    2014 Christmas Show - 5x E681-12, 3x Ren48LSD, 32x42 TLS3001 pixel MT/Star, 4x Rainbow Floods, 12x DIYC Floods, SuperPixelStar, PixaBulb House outline

    Ignorance is Temporary - Stupidity is Forever...

  5. #5
    Join Date
    May 2007
    Location
    Virginia Beach, VA
    Posts
    1,327
    Post Thanks / Like

    Default Re: Anyone using this controller

    I found this quote on the bottom of the Descripton for the Device Hope it helps.

    This interface is compatible with the popular "open DMX" style USB interface and can be used with the Advanced version of Light-O-Rama's S3 or Vixen software.
    More channels then I can use.
    More light bulbs then I care count.
    http://www.vimeo.com/user1106747/videos

  6. #6
    Join Date
    Nov 2009
    Location
    Brisbane - Australia
    Posts
    807
    Post Thanks / Like

    Default Re: Anyone using this controller

    Graham, the USB485RJ-ISO does work in Vixen under Windows XP 32-bit. It did not work with Windows 7 64-bit though. I don't have a Windows 7 32-bit machine here at work to test it with.

    I suspect the problem will be that you have not told Vixen to use the channels with the DMX output plug-in.
    David...

    Visit da-Share, the new home of da_DMX and da_E131.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •