Re: WS2811 pixel compatibility
Hey Jim,
If I were to purchase the following strips (http://www.aliexpress.com/product-fm...olesalers.html) based on WS2811, would these work with my E681 that I built back in February? Do I need to upgrade any firmware, or just select 1804 as the pixel type in the controller? Thanks!
[SIZE=3][B]8000 + E1.31 Channels (5x E68x controllers)
128 Renard Channels[/SIZE][/B]
sequencing with LightShow Pro 2.8 and/or Vixen 3 (using xLights scheduler)
2 x Pixel Mega Trees, RGB Pixel Roofline, 2 x RGB Pixel Spinners, 11 x Pixel Bushes, 6 x GECE Icicle Arches, 16 x RGB Mini Trees, 2 x Vertical Pixel Poles,
12 x 10w RGB Floods, 160 Strobes controlled by Arduino
[URL="http://www.controlthelights.net"]http://www.controlthelights.net[/URL]
Bookmarks