Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: Interest in a group buy for the V.3 board and daughter boards?

  1. #11
    Join Date
    Dec 2009
    Location
    Tecumseh, OK
    Posts
    74
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    I would be interested in the following.

    Helix Network Controller (HNC) - 3
    Helix Network Node (HNN) - 0
    Helix Daughter Board (HDB) - 0
    Helix SSR Daughter Board (HSDB)- 0

    XBee radio - 4
    USB to RS485 board - no

  2. #12
    Join Date
    Jan 2010
    Location
    Nashville, TN
    Posts
    814
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    Helix Network Controller (HNC) - 1
    Helix Network Node (HNN) - 1
    Helix Daughter Board (HDB) - 0
    Helix SSR Daughter Board (HSDB)- 0

    XBee radio - no
    USB to RS485 board - no
    208 channels
    2 Ren 24SS / 4 REN 16SS / 2 REN 48LSD controllers
    8 Mighty Mini RGBW floods
    1 LEDTriks
    2 Helix V3 controllers and Vixen to rule them all

  3. #13
    Join Date
    Dec 2010
    Location
    Connecticut
    Posts
    141
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    Making sure i haven't missed anything here. Any movement on this? I'm anxious to fire up my soldering iron.

  4. #14
    Join Date
    Oct 2008
    Location
    Indiana
    Posts
    1,196
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    Just a bit of an update - I've held off doing much with this, until I had the finalized BOM. We now have that, but I haven't had time to check out the BOM, and come up with any figures. There's probably enough people and boards, to save a bit, plus, I tend to buy bulk, whenever I can, on resistors, caps, etc, and that might save a bit, also. I have been pretty busy, but hopefully will slow down a bit, in the next few days, and get a chance to go over some numbers. It will probably be into next week, before I come up with any numbers.

    I'll keep everyone posted, through this thread.

    thanks,

    Roger
    [IMG]http://crbest.com/vixenlogo02.jpg[/IMG]

    Roger Phillips
    Oxford, IN
    256 channels of blinkin', dimmin' bliss...
    "[B][I]The road goes on forever, and the party never ends!![/I][/B] [I]Robert Earl Keen[/I]

  5. #15
    Join Date
    Oct 2008
    Location
    Indiana
    Posts
    1,196
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    Update - I am getting things figured out for a group buy, seeing if we can save any money. It is taking some time, as Mouser has DRASTICALLY changed the pricing on some of the items, and I am comparing them with other places, Jameco in particular, and comparing everything. Also, since we are dealing with several different boards, it is taking a while. I'll keep everyone posted. I know everyone is anxious to get soldering, and if you've decided to get parts on your own, please let me know as that can change the amounts. Christmas is still a long ways away...

    Roger
    [IMG]http://crbest.com/vixenlogo02.jpg[/IMG]

    Roger Phillips
    Oxford, IN
    256 channels of blinkin', dimmin' bliss...
    "[B][I]The road goes on forever, and the party never ends!![/I][/B] [I]Robert Earl Keen[/I]

  6. #16
    Join Date
    Dec 2011
    Posts
    12
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    If it is not too late to participate I would be interested in the following:

    Helix Network Controller (HNC) - 2
    Helix Network Node (HNN) - 0
    Helix Daughter Board (HDB) - 0
    Helix SSR Daughter Board (HSDB)- 0

    XBee radio - no
    USB to RS485 board - no

    Thanks.

  7. #17
    Join Date
    Jan 2012
    Posts
    2
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    I'm decreasing my plans by one SSR Daughter board. I'm still interested in 2 HNC, 2 SSR DB and 2 USB to RS485.
    Thanks,
    Walt

  8. #18
    Join Date
    Jun 2007
    Location
    Just south of Portland Oregon
    Posts
    812
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    Quote Originally Posted by Greg in Canby View Post
    Thanks for the PM Roger . . . and the impending work!

    Helix Network Controller (HNC) - 1

    Helix Daughter Board (HDB) - 1
    Helix SSR Daughter Board (HSDB)- 1
    Roger,

    I have the boards now but will need the BOMs for all above.

    Greg
    Last edited by Greg in Canby; 04-02-2012 at 02:01 AM.

  9. #19
    Join Date
    Jan 2010
    Location
    Nashville, TN
    Posts
    814
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    Please disregard this post.
    208 channels
    2 Ren 24SS / 4 REN 16SS / 2 REN 48LSD controllers
    8 Mighty Mini RGBW floods
    1 LEDTriks
    2 Helix V3 controllers and Vixen to rule them all

  10. #20
    Join Date
    Jan 2010
    Location
    Nashville, TN
    Posts
    814
    Post Thanks / Like

    Default Re: Interest in a group buy for the V.3 board and daughter boards?

    Quote Originally Posted by mikentn View Post
    Helix Network Controller (HNC) - 1
    Helix Network Node (HNN) - 1
    Helix Daughter Board (HDB) - 0
    Helix SSR Daughter Board (HSDB)- 0

    XBee radio - no
    USB to RS485 board - no
    Roger,

    I decided to go ahead and order my parts on my own, so please remove my 1 HNC and 1 HNN from the the totals.

    Thanks,
    Mike
    208 channels
    2 Ren 24SS / 4 REN 16SS / 2 REN 48LSD controllers
    8 Mighty Mini RGBW floods
    1 LEDTriks
    2 Helix V3 controllers and Vixen to rule them all

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •