Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: DMX, Renard, sACN Tester

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2007
    Location
    WI
    Posts
    2,611
    Post Thanks / Like

    Default DMX, Renard, sACN Tester

    What about a DMX/Renard/sACN (or whatever else) tester? I've been situations where I would rather use a handheld controller instead of booting my laptop or I just want to isolate a problem, this could fill both problems.

    I will try to keep things through hole, but I will likely include the SMT USB parts for those that don't want to buy a prop-plug. Initially I will focus on DMX and sACN support since those are easily testable for me and then widen the data type options to Renard or others.

    This tester will have an LCD with key switches for menu navigation (sorry no touch screen). In a perfect world it would both receive and transmit each of the protocols. I also plan to implement some diagnostics information for each protocol (IE byte space time, MAB time, etc).

    Since this will be my first battery powered project any advice or design ideas are welcomed.
    DMX, RDM, ArtNet, sACN, and RDMnet...the future of DIY Christmas.
    Designer of the PropController an open source single-board hardware platform designed for lighting and prop control.

  2. #2
    Join Date
    Dec 2010
    Location
    Oceanside, CA
    Posts
    2,363
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    Subscribed!
    [url]http://christmasonquiethills.com/[/url]
    [url]http://diychristmas.org/vb1/index.php[/url]

  3. #3
    Join Date
    Jun 2009
    Location
    Ottawa, Ontario, Canada
    Posts
    2,845
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    In my ever so humble opinion.. select your enclosure now. Design the board to match your enclosure.
    I've got far too many "half done" projects because I could never get them finished enough to release.
    (Plenty of nice boxes, including batter compartments, at mouser and digikey)
    Standard Disclaimers apply:
    "Product may not appear as shown, your mileage may vary, I'm not a doctor nor do I play one on television, these are not the droids you seek"

  4. #4
    Join Date
    Jun 2007
    Location
    WI
    Posts
    2,611
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    Quote Originally Posted by LabRat View Post
    In my ever so humble opinion.. select your enclosure now. Design the board to match your enclosure.
    I've got far too many "half done" projects because I could never get them finished enough to release.
    (Plenty of nice boxes, including batter compartments, at mouser and digikey)
    I was thinking about something like this, pelican makes a similar version that costs more. If that seems too big I will continue to look for cases.
    DMX, RDM, ArtNet, sACN, and RDMnet...the future of DIY Christmas.
    Designer of the PropController an open source single-board hardware platform designed for lighting and prop control.

  5. #5
    Join Date
    Sep 2008
    Location
    Baulkham Hills, NSW
    Posts
    2,608
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    Most units use the Link pack / switch option. I prefer the push button switch cause I am worried about losing link pack in the garden when doing changes on the fly.
    Prior to RDM, I believe JEC came up with a sequence / method that will set the Controller into address setting mode. (Not sure if this has been published.) http://response-box.com/rgblights/2007program.shtml
    [B][I]Matt[/I][/B]

    You too can become a Supporting member of DIYC.
    Check it out [URL="http://doityourselfchristmas.com/forums/payments.php"]here[/URL]

    I record my Blinky Flashy travels here: [URL="http://MyNoelLights.com"]MyNoelLights.com[/URL]

  6. #6
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    4,302
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    Nice !
    Can't wait to see it.

  7. #7
    Join Date
    Jun 2007
    Location
    WI
    Posts
    2,611
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    Quote Originally Posted by ukewarrior View Post
    Can't wait to see it.
    Me too. ;)
    DMX, RDM, ArtNet, sACN, and RDMnet...the future of DIY Christmas.
    Designer of the PropController an open source single-board hardware platform designed for lighting and prop control.

  8. #8
    Join Date
    Jan 2010
    Location
    Pittsbor, NC
    Posts
    243
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    That sounds interesting.

    A feature I'd like to see, if it's early enough to get requests in?

    DMX start address setting, the type where you output a 0-255 level to set the controller address.

  9. #9
    Join Date
    Jun 2007
    Location
    WI
    Posts
    2,611
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    Quote Originally Posted by Jack Stevens View Post
    DMX start address setting, the type where you output a 0-255 level to set the controller address.
    The challenge is there are a number of ways to do this, none of which follow the standard. Can someone collect all the methods and list them here so I can think about how to implement them?
    DMX, RDM, ArtNet, sACN, and RDMnet...the future of DIY Christmas.
    Designer of the PropController an open source single-board hardware platform designed for lighting and prop control.

  10. #10
    Join Date
    Sep 2008
    Location
    Baulkham Hills, NSW
    Posts
    2,608
    Post Thanks / Like

    Default Re: DMX, Renard, sACN Tester

    Quote Originally Posted by DynamoBen View Post
    The challenge is there are a number of ways to do this, none of which follow the standard. Can someone collect all the methods and list them here so I can think about how to implement them?
    These are the ones I found when settling on the Sum method.

    Start Address (Sum)
    Start Address = Ch1 + Ch2

    Start Address (Units)
    Start Address = Ch1*100 + Ch2*10 +Ch3

    Start Address (Modified Sum)
    0 to 255
    Start Address = Ch1 : Ch2=0
    256 to 512
    Start Address = Ch1 +256 : Ch2=1
    [B][I]Matt[/I][/B]

    You too can become a Supporting member of DIYC.
    Check it out [URL="http://doityourselfchristmas.com/forums/payments.php"]here[/URL]

    I record my Blinky Flashy travels here: [URL="http://MyNoelLights.com"]MyNoelLights.com[/URL]

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •