ledtriks 1x2 will not properly display vixen 2.1.4 .led files

[daver11]

HELP I have a 1x2 ledtriks w/triks-c, it displays the clock on panel one ok and it displays the countdown on panel 1 and 2 correctly, using ltc_11
in command line mode (no bat files currently). The problem when I try to display .led files created using Vixen 2.1.4 the only panel that display's
is panel 1, panel 2 remains blank. The cmd line looks like this ltc_11 radio.led #fdl50 #frm #cls I'm at a loss as to what I have done to create
this problem

[TimW]

Did you configure the panels in vixen to be 2x1? You have to tell vixen to create 2x1 frames....

[daver11]

Hi Tim
I can not find the setting in Vixen to tell it to generate 1x2 ! Please point this dummy in the correct direction.
Thank You
Dave

[Reddy_Kilowatt]

Open or start a ledtriks sequence. Select Ledtriks on the toolbar at the top of the screen. Select board layout.

-Craig

[TimW]

Sorry - I should have mentioned that! Once you have selected the board layout, drag it along so that there are 2 green boxes in a row. What you will find is that the Ledtriks screen you now put the red dots onto should be twice as wide (for your 2 panels)

[daver11]

Gentlemen;
Thank you this solved my problem. I had not noticed that when I started an ledtriks sequence that the tool bar had changed, I still have many things to learn
about Vixen.
Thanks again;
Dave