Results 1 to 2 of 2

Thread: Etching Kit

  1. #1
    Join Date
    Dec 2010
    Posts
    27
    Post Thanks / Like

    Default Etching Kit

    Hello All
    I hope this is the right place to post this. I was at Radio Shack last weekend and found that they had their PCB Etching Kit on sale for $2.99. I bought the two they had and then When to another store and saw three more but I didn't know what I would do with them all. I know I want to try to etch 3 new strobe boards for my $6 strobes that the boards cracked or were damaged. I think It's going to be a fun challenge once I finish up Repairing my led strings. Then I have some north pole lights to change out the globe socket to rbg.
    Brian

  2. #2
    Join Date
    Dec 2010
    Location
    California
    Posts
    2,512
    Post Thanks / Like

    Default Re: Etching Kit

    well if you have space on the PCB's your going to etch make traces larger and be sure to create that spaghetti-o ring around where your going to solder to ...its near impossible to solder if it disappears just some tips if your going to mod anything
    [B][I]MY Favorite Links:[/I][/B]
    [URL="http://doityourselfchristmas.com/wiki/index.php?title=Main_Page"][COLOR="red"]Christmas Wiki[/COLOR][/URL] | [URL="https://www.facebook.com/dancingofthelights"][COLOR="red"]My Facebook Page[/COLOR][/URL] | [URL="https://www.calvertimage.com"][COLOR="red"]My Website[/COLOR][/URL]
    _________________________________________
    [B]2013 Show[/B]
    1 - E682 not in use
    248 - Renardss Dimmable channels
    144 - Renard48lsd channels
    272 - channels in use
    40,000 lights synchronized and static

    50% assembled and displayed

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •