Results 1 to 4 of 4

Thread: Public Review of ACN and RDM Changes

  1. #1
    Join Date
    Feb 2009
    Location
    San Antonio, TX
    Posts
    128

    Default Public Review of ACN and RDM Changes

    ESTA, the group behind such standards as DMX, RDM, and ACN, frequently publishes drafts of proposed changes to these standards. Right now there are two sets of documents up for comment: one involving additions to RDM and the other a set of updates to ACN. See the Public Review Documents section of the ESTA website for free access to the drafts.

    These drafts are only posted for a limited time, so check regularly if you're interested such things.
    (yet another Don) in pursuit of the perfect blinky.

  2. #2
    Join Date
    Jun 2007
    Location
    WI
    Posts
    2,526

    Default Re: Public Review of ACN and RDM Changes

    Thanks for the heads up, I will take a peek. I'm especially interested in the RDM doc since I'm writing the code right now.
    DMX, RDM, ArtNet, sACN, and RDMnet...the future of DIY Christmas.
    Designer of the PropController an open source single-board hardware platform designed for lighting and prop control.

  3. #3
    Join Date
    Feb 2009
    Location
    San Antonio, TX
    Posts
    128

    Default Re: Public Review of ACN and RDM Changes

    Quote Originally Posted by DynamoBen View Post
    I'm especially interested in the RDM doc since I'm writing the code right now.
    There is an RDM-specific forum operated by some of the key developers that may help with interpreting the standard. They are also keepers of The Errata.
    (yet another Don) in pursuit of the perfect blinky.

  4. #4
    Join Date
    Jun 2007
    Location
    WI
    Posts
    2,526

    Default Re: Public Review of ACN and RDM Changes

    Quote Originally Posted by BF210 View Post
    There is an RDM-specific forum operated by some of the key developers that may help with interpreting the standard. They are also keepers of The Errata.
    I've known about the RDM forum for a couple of years, its a good resource but not highly trafficked.
    DMX, RDM, ArtNet, sACN, and RDMnet...the future of DIY Christmas.
    Designer of the PropController an open source single-board hardware platform designed for lighting and prop control.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •