PDA

View Full Version : Grinch problems, SSR?



buldog198
12-08-2009, 09:32 AM
OK I have a Grinch and 2 SSRoz made up. i tried both SSR's and rj45jack B and B(on Grinch). I get the same result each time. with only channel 1-2 on Jack A and channel 3 and 2 on channel B the lights come on. i have changed the ic chip on the Grinch. and i do see any touching solder joints.
any help would be gratefully accepted.

fathead45
12-08-2009, 09:41 AM
to me it does sound like loose solder joints. i had that too on my grinch. if i wiggled it i could get the channel. try reflowing all the joints.

buldog198
12-09-2009, 01:27 AM
hi, thanks for helping. i forgot to set the port to EPP mode. but now i am back on track just two more ssr's to finish. then, small blinky flashy

fathead45
12-09-2009, 09:04 AM
ahh...well that is good to hear. all that matters is it is working, lol