Ren-C All LEDs remain ON

[kenjinx]

I'm having problems with my Ren-C. When I apply power all the LEDs come ON and stay on. I believe it has something to do with the PIC programming but I'm not sure. When I erase the PIC I only get the power light. When I flash the PIC I get all LEDs on. I've tried two different PICs and I've tried to program the PICs with both of the ASM files on the WIKI site and get the same results. Anybody have any suggestions?

[toodle_pipsky]

Off the top of my head I believe when I had ZC problems all LEDs came on. I'll say ZC issues. How are you doing ZC? (someone else might have a better idea).

[RavingLunatic]

As TP has said, you have a ZC issue. All the LEDs will come on at first but will go out when the ZC is detected. Then you'll have the Power ON and Heartbeat blinking.

[kenjinx]

BINGO! I had reversed the polarity out of the H11AA1. At least I gained more experience programming PICs. Thanks for the help.