View Full Version : pc to ren-c cable
10-20-2009, 08:41 PM
how do you hook up the serial port to the ren-c i can find "use ren-t" and the wiring from the parallel on pc to grinch but i cant seem to find the pinout on a cable to go straight to the ren-c
10-20-2009, 10:43 PM
This is what you need. All the Renard boards use the same basic interface.
10-21-2009, 10:33 AM
so rj45 pins 1,2,5 all go to pin 5 on the de9 and rj45 pin 4 goes to pin 3 on the de9 and i source my zero cross externally to the on board header if i understand correctly
10-21-2009, 12:03 PM
You have it correct.
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.