ledtricks

[boarder3]

I bought 2 kits a while ago but only put the 3 boards together. I have another 3 boards left i would like to add them to 3 boards i have to make it 6 total can i do that and what do i need?

[budude]

Well - the board sets themselves do not "talk" to each other but the LEDTriks board (or Triks-C or PIX-C) do. Basically you just need to recreate exactly what you did already for the first set of three and connect them together through the controller boards.

[LabRat]

Not clear to me what you have ..

2 sets.. but you've put only three together, makes me think you have the 3 led panels. Have you got the LedTriks controllers?

[boarder3]

I have the tricks controller but do i need an additional triks-c dont think i have that

[budude]

Yes - you need a carbon copy of everything - 3 panels + 1 LEDTriks + Triks-C/PIX-C (optional) is one master set. The controllers only control one set of 3 panels each.

[boarder3]

Sorry for the dumb questions so i need 2 triks-c?

[budude]

Yep - two of everything - the Triks-C talks to a single LEDTriks controller which talks to a single set of 3 panels. The Triks-C can be daisy-chained however so at least you only need one RS232/485 dongle! :p

I think I asked the same exact question just a few months ago so don't worry about it!

[boarder3]

Thanks for the help

[g2ktcf]

just one note...they all work off one serial port.