View Full Version : Mouser Out of Stock - Part Subtitution
masterng
09-24-2009, 07:31 PM
Mouser is out of stock on a few items. I check the wiki for subtitution parts, but some parts don't have a sub listed:
Diode: Mouser# 625-1N5817-E3 / Manufacturer# 1N5817-E3/54
Crystal: Mouser# 520-TCH1843-X / Manufacturer# ECS-2100AX-18.432MHZ
Hope I can get all the parts from Mouser. Last time I have to split the order and got some from Digi-Key and the total cost became much higher... Thanks
P. Short
09-24-2009, 10:50 PM
This is presumably regarding the Ren64-XC?
For the diodes any of the 1N5817 diodes that mouser lists in a DO-41 package will work.
For the crystal oscillator, try ACH-18.432MHZ-EK should work. It is cheaper and has a larger temperature range.
joneslights
09-25-2009, 07:05 AM
Has anyone ever posted an "alternate" parts list? Mouser seems to be out if stock a lot lately. It would be nice to have. I know mouser will suggest parts but, that can get confusing.
lizard050
09-25-2009, 07:50 AM
Do you think that crystal would work for the REn ss series. I don't know what these #'s mean but will it matter if the frequency stability # and the load capacitance #'s are different?
christmas-light
09-25-2009, 07:56 AM
Hi
I buy those parts there is out of strock on ebay :p
C - L
kostyun
09-25-2009, 09:07 AM
My last order of crystals for the Ren24 were on ebay - for $5 shipped I was able to get 20 crystals.
masterng
09-25-2009, 10:31 AM
Sorry, didn't make it clear. I was looking for parts for the Renard SS. Could you experts confirm if the following will work for SS boards:
Crystal: 815-ACH-18.432-EK in place of 520-TCH1843-X
Diode: 625-1N5817-E3/4 in place of 625-1N5817-E3
Thanks
P. Short
09-25-2009, 12:19 PM
My earlier comment applies to the Ren-SS boards as well.
aaron09
09-25-2009, 01:49 PM
I just bought that same crystal from Jameco.com, for the same reason. They have two choices, I wasn't sure which one to purchase, so I just bought a handful of both, came to about 8 dollars or so.
I actually just received them, as well as everything else I needed from mouser today! Heating up the iron as we speak.
-Aaron
Edit: Here should be the right part number at Jameco.com for the crystal - 325649
Wayne J
09-25-2009, 01:58 PM
Has anyone ever posted an "alternate" parts list? Mouser seems to be out if stock a lot lately. It would be nice to have. I know mouser will suggest parts but, that can get confusing.
http://www.doityourselfchristmas.com/wiki/index.php?title=Part_Substitutions
joneslights
09-25-2009, 03:57 PM
http://www.doityourselfchristmas.com/wiki/index.php?title=Part_Substitutions
I caught the link on another thread, Thanks!
masterng
09-26-2009, 05:52 PM
I got my order in. I used the following parts to substitute the out of stock items:
Crystal: 815-ACH-18.432-EK
Diode: 625-1N5817-E3/4
Modular Jack: 571-5555799-1
8-pin Socket: 575-193308
Hope things are working out fine. Thanks all for helping.
Wayne J
09-26-2009, 08:26 PM
I got my order in. I used the following parts to substitute the out of stock items:
Crystal: 815-ACH-18.432-EK
Diode: 625-1N5817-E3/4
Modular Jack: 571-5555799-1
8-pin Socket: 575-193308
Hope things are working out fine. Thanks all for helping.
This modular jack is a bit cheaper.... 538-95503-2881
(added it to the wiki sub page)
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.