P. Short
09-09-2007, 12:02 PM
Here is a candidate for the next revision of the PCB up for review.
The changes are as follows:
1) corrected pinout on the RS485 connections (pins 4,5 were previously reversed).
2) corrected pinout on the SSR outputs (order of channels 1-8 was previously reversed from those of the Renard64).
3) moved parts so that R2A wasn't underneath C1.
4) moved parts to add another bypass cap (C3).
--
Phil
The changes are as follows:
1) corrected pinout on the RS485 connections (pins 4,5 were previously reversed).
2) corrected pinout on the SSR outputs (order of channels 1-8 was previously reversed from those of the Renard64).
3) moved parts so that R2A wasn't underneath C1.
4) moved parts to add another bypass cap (C3).
--
Phil