Parts needed for SSROZ V2.5e

[ulto]

Can anyone help me with the parts list for the SSROZ V2.5e? I was looking in the forums, but was a little confused on the parts list because it listed a couple items twice. It didn't make sense to me. Thanks!

[Aurbo99]

http://www.christmasinshirley.com/wiki/index.php?title=4_Channel_SSROZ_Assembly_Instructi ons

[sdrose65]

I'm a newbie here but was looking at the ssroz parts list and noticed the same duplication. But in looking at the image of the board and the schematic the single duplicate is for the power led, the other 4 of that same part are for the ssr's. HTH

Steve

[bmcgeeny]

I'm a newbie here but was looking at the ssroz parts list and noticed the same duplication. But in looking at the image of the board and the schematic the single duplicate is for the power led, the other 4 of that same part are for the ssr's. HTH

Steve

huh???????????????????????

[prof]

Re the parts list in the wiki for the ssroz. The duplicate is for the 680 ohm resistor. It is listed as a qty of 4 followed by a qty of 1. The wiki needs to be changed to a single line with a qty 5 to remove the confusion.

[Aurbo99]

Now I understand..

Originally the single 680Ohm resistor was listed at a 780Ohm or similar, it was found that a 680 would suffice and the value was changed to reduce different parts required.

I guess the 2 lines could be merged into a single 5 count.

If I had edit access, I'd change it for you. :)

=)

[dmcole]

If I had edit access, I'd change it for you. :)

I do have edit access, so I did.

\dmc

[ReyesTHEstud]

Has anyone been able to find the PCB image for the 2.5 SSR on wiki? I see the finished pic, but what would i use for home etch?

-mark

[Wayne J]

Has anyone been able to find the PCB image for the 2.5 SSR on wiki? I see the finished pic, but what would i use for home etch?

-mark

Here you can find a home etch file. ;)


http://www.doityourselfchristmas.com/forums/showthread.php?t=4666