PDA

View Full Version : Stand for P10 Matrix Enclosure



Kev7274
11-05-2017, 03:27 PM
Got the enclosure built and I'm now trying to decide how to display it outside.

Was thinking about using some eye bolts on top and then using some a-frame brackets to make a stand and then hang it from chain. The only problem would be I would need to drill two holes on top for the eye bolts. I can seal it up,but if I their is a better way,then I would rather not drill holes.

I have my connections coming out the bottom of the enclosure,so just standing it up on the front porch won't work.

Not matter what I decide,it will more than likely be put on the front porch to give it some sort of protection from the weather.

Any other suggestions?

stallionent
11-05-2017, 04:19 PM
Hang it under a window? using angle braces https://www.homedepot.com/p/Everbilt-6-in-Zinc-Plated-Corner-Brace-15214/202033908?keyword=angle+brace+6%22