PDA

View Full Version : PP Preview



MindTrik
09-22-2014, 02:08 PM
Previews aren't working for PP's. I pulled up a test sequence I did for a Pixel Tree last week that was working into the newest version...and it will not show up in Preview. This goes for effects generated in HLS and Nutcracker. Regular RGB effects show fine.

MindTrik
09-22-2014, 02:15 PM
Video of my steps uploading

MindTrik
09-22-2014, 02:22 PM
https://drive.google.com/file/d/0B71_WLJUoWJKQU5NVEJfUzBCLW8/edit?usp=sharing

JHinkle
09-22-2014, 02:34 PM
You are making it hard on yourself when making a PP by you doing all the channel assigning work.

Just go into Manage PP --- and select the TOP button --- I will make the PP and assign all the channels.

The only thing you need to do then is to assign Preview Group/channels in Manage Raw Channels.


As far as your test ... I have fully tested and believe HLS is fine.

What I don't know is if your NC effect is fine.

Sent you a PM.

Joe

smeighan
09-22-2014, 03:32 PM
Removed. Posted in wrong forum, sorry

MindTrik
09-22-2014, 06:08 PM
This was actually my fault...I neglected to set my PP channels after creating my PP. All works as it should