View Full Version : k8055 and hill320

03-16-2014, 04:37 PM
i have built a hill320 controller, and want to connect it to the k8055 so i have usb access.

the 1-8 digital from the 8055 + 2 analogs being "converted" to digital as 0- for off and 255 for on.


i need the source code for the 8055 plug in, so i can add the math for the data locking to the flip flops, and the steering for the hill

anyone know where i can get the source for the 8055, 32 bit and 64 bit.

Thank you

03-16-2014, 05:46 PM

I know you're new here, but did you even try Googling?

I did.


P. Short
03-16-2014, 11:07 PM
In addition to the link that dmcole provided, there are .net decompilers available on the internet - use google to find them.

03-29-2014, 11:41 PM
btw yes i did google, your link, controls the k8055 for ONLY the 8 data outs....

if you read what i posted you would see that i need the 8055 digital outputs AND the two analog outputs to do the 6 write output that the hill320 needs.....

if your lost, it isnt just downloading and installing an already made plug in, hence why this is in the "developement" area