PDA

View Full Version : Renard Output Issue



rklarman
11-21-2012, 10:39 PM
I have configured all renard controllers in HLS but the first 4 channels on one Ren24SS controller and the last 20 of another Ren24SS controller aren't turning on. I tried this with the manual test as well as sequencing the channels to come on. I have entered all of the channels in by com port number. This is COM 8 which has 7 renard controllers (Ren24,Ren24,Ren24,Ren24,Ren24,Ren64,Ren24) - it is the first and third with issues (channels 1-4 on the first controller and channels 5-24 on the third controller). I am using the standard renard firmware. These channels work fine in Vixen.

Is there anything I can try to get these channels to work?

JHinkle
11-21-2012, 11:04 PM
I'm sorry - I don't understand what you are attempting to describe.

I would suggest enabling OutDebug and look at the data to make sure what you have told HLS to do is what you intended it to do.

Joe

rklarman
11-21-2012, 11:12 PM
I set up all of the controllers within HLS and was just using the test function to make sure everything was working. Those 24 channels don't come on for some reason. I will try the debug tonight and see what information it gives me.