PDA

View Full Version : EMT Bending How-To



zman
08-29-2012, 10:05 PM
I had to admit I was retarded when it came to bending EMT conduit. I have not been good at it, and finally got some help to learn how to get bent in a better way.

I have never seen a tutorial on How To bend conduit, so I came up with this one. I hope it helps someone out there who was as "challenged" as I was doing this.

http://www.woodinvillewonderland.com/images/EMT_Bending.pdf

DanoNJ
08-29-2012, 10:11 PM
Nice write up, Mark!!

dirknerkle
08-29-2012, 10:18 PM
Great job! You have a future in DIYC help write-ups!!!

budude
08-29-2012, 10:24 PM
Very nice - - makes me want to go out and bend something!

lightman
08-29-2012, 11:40 PM
Very informative. Nice clear photos. Great write - up. Thanks for sharing....

Regards,
Lightman

dirknerkle
08-29-2012, 11:56 PM
Very nice - - makes me want to go out and bend something!

Like an elbow??? :lol:

dmcole
08-30-2012, 05:58 PM
Zman:

Your URL changed ... this document is now at ...

http://www.woodinvillewonderland.com/images/EMT_Bending_1.0.pdf

\dmc

zman
08-30-2012, 06:53 PM
Zman:

Your URL changed ... this document is now at ...

http://www.woodinvillewonderland.com/images/EMT_Bending_1.0.pdf

\dmc

Yes, it just did about an hour ago. I realized I left out an important note on pg 12. Thanks for reposting the new link.

kychristmas
08-31-2012, 08:29 AM
When I first saw this, I thought to myself, now we are getting into overkill on information. After seeing this, I now feel stupid for even thinking it. An excellent write-up with detailed pictures. Great Job Mark. Nice House/Property by the way.

zman
08-31-2012, 10:09 AM
When I first saw this, I thought to myself, now we are getting into overkill on information. After seeing this, I now feel stupid for even thinking it. An excellent write-up with detailed pictures. Great Job Mark. Nice House/Property by the way.

Yeeaahh.......... I thought the same thing. There is more detail there than needed, but without doing a video, there is a lot of nuance that needed to be conveyed. I tried to do a PPT format, but it lends itself better to how I created it.

Thanks for the feedback.

zman
03-25-2013, 09:38 PM
I modified this How-To slightly. I found myself in need of bending some larger diameter circles so I posted a new update to this information. You can find it here:
http://www.woodinvillewonderland.com/images/EMT_Bending_2.0.pdf

critic2
03-25-2013, 10:06 PM
Nice work Mark.
Some great info. Thanks

callen360
03-26-2013, 12:02 PM
I cannot get the links to work, getting 404 error.

callen360
03-26-2013, 12:03 PM
Nevermind, worked now. Sorry.