PDA

View Full Version : Lightjams



riri7707
06-22-2012, 01:23 AM
Hi,
Does anyone knows this software :

Works with standard DMX, sACN etc... Up to 16 DMX universe for moment

www.lightjams.com

It was just released with sACN Protocol and i'm just using it for RGB led pannels matrix i'm buiding.

Cheers... Henri

StandingInAwe85
06-22-2012, 05:39 PM
Never heard of it, but this software looks amazing, almost too good to be true... If it works with the pixels and e681 boards I know what I'm playing with this weekend. I wonder if it could completely replace Madrix for pixel grids...

mrpackethead
06-22-2012, 11:32 PM
Its pretty dam sharp!!!

Aurbo99
06-23-2012, 04:14 AM
Henri

Your a hard man to reach.. I've left you several pm's regarding your Pixel projects. Good to see you're still around.

riri7707
06-23-2012, 10:53 PM
I was very busy this first part of the year...

Now back, always around pixels and building a wall matrix 4m*3m with 2801/2803 pixels...

LightJams must to work with E681 devices, i don't see a PB here as these devices are E1.31/sACN compliant.

From my side i use it with J1sys devices (www.j1sys.com)

What is impressive, i contacted the developper few weeks ago and in a week, he implemented the sACN protocol, and i began the first tests...

So this SW will grow in possibilities in the next months for sure. The power here is to use the Multicast mode, who easyest the life in terms of settings; pretty cool...

You can try this sequence made for sACN, using 6 universe: http://www.lightjams.com/projects/sACN.ljp

The hue is smoothly changing while you can activate various intensity effects from strobes to music beat. Hit CTRL-G to see all effects.

Try it, you will be surprised...

Henri

chelmuth
06-23-2012, 11:28 PM
I've been trying it out tonight.. I've gotten it to run my Superstrips via my RPM DMX Bridge over the 1.31. I just can't figure out how to make the software set specific colors and such. I managed after an hour to get a chase going but couldn't figure out how to get the colors to change or anything.. :) I'll play more with it tomorrow.

Aurbo99
06-24-2012, 09:05 AM
http://hackaday.com/2012/06/22/bring-your-led-matrix-project-into-the-living-room/