PDA

View Full Version : AusChristmasLighting 'Using Pixels with the J1SYS ECG-P12R' Controller Guide



fasteddy
05-16-2012, 06:11 PM
We have released a 33 page graphical guide on setting up and controlling pixels using the ECG-P12R, This manual should help those getting into pixels to understand the various connection and power injection methods used and how to configure the ECG-P12R pixel controller both in hardware and software. The guide is also an excellent resource for those using an ECG-PIXAD8 as over 90% of the guide is the same

A must for anyone who either uses an ECG-P12R or a ECG-PIXAD8 or is looking at getting into pixel lighting.

The manual can be found here (http://auschristmaslighting.com/forums/index.php/topic,2232.0.html)

timon
05-16-2012, 10:58 PM
Eddy,

Looking good. Could you add the location of all of the mounting holes and their relation to the clearance outline of the board pair?

Thanks
John



John
Sent from my iPad using Tapatalk

pmcpa
05-17-2012, 05:09 PM
[ Guests cannot view attachments ]