View Full Version : Renard 24 setup??
12-26-2007, 09:45 AM
I have looked in the wiki and the information for the Renard 24 with SSRs on board is not very detailed. Is there a place where I can get more detailed information about how to hook it all up, and since this board already has a transformer on it will I still need to go the Ren-T path? For powering up needs, could you daisy chain the boards together (as in a series), or would you have to use a separate plugin on each board?
The website that was printed on the PCB didn't really yeild any help.
12-26-2007, 10:05 AM
The Renard 24 is an all in one board. Everything it needs is right on the board. No need for anything else. You just plug the Ren 24 right into the serial port or usb-serial adapter and you will be flashing lights. You can daisy chain many ren-24s one after the other. The only limit is the determined by the timing interval used in Vixen and the baud rate used. You can find out more about thet on the Christmas Wiki in the General Renard information page.
01-01-2008, 12:40 PM
I am still working on trying to get everything together as far as fully detail manuals, etc for the Renard24.
If there are specific questions - feel free to PM me and I will answer them.
The post here is probably the most specific about the board itself.
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.