Loading a shared sequence

[chadowamsley]

I cant find any information for help on looking at a shared sequence. I can load the sequence into Vixen 2.1, but nothing is shown on the grid. I'm able to see the different channels but that is it. When I click the play button it runs the sequence, just without music. The music is probably due to copyright and all, but should I be able to see how each channel is setup ? I'm not using the sequence, I'm just trying to get ideas on how others set things up, since this is my first go around. Maybe this has been covered but I could not find anything about this, so I apologize if it was.

[budude]

I cant find any information for help on looking at a shared sequence. I can load the sequence into Vixen 2.1, but nothing is shown on the grid. I'm able to see the different channels but that is it. When I click the play button it runs the sequence, just without music. The music is probably due to copyright and all, but should I be able to see how each channel is setup ? I'm not using the sequence, I'm just trying to get ideas on how others set things up, since this is my first go around. Maybe this has been covered but I could not find anything about this, so I apologize if it was.

You need the profile for the sequence - it would be a .pro file and gets put into the Profiles directory.

[chadowamsley]

Thank you for the response. Ill keep looking for one that has a working .pro file then.

[olingerjccj]

must of the sequences shared do not have the audio, but a lot do. I copy a lot so couple things. The profile is important, Some of the ms setting are set different probably they are at 10 ms so you have to change that to 50 or 100ms. Just keep them the same or the cell data will be way off.

John

[chadowamsley]

Thank You. I had one that had the .pro file, which I placed in the profile folder, but still nothing. I was able to see the 128 channels listed, and colors, but nothing on the grid. When I clicked play, the adjustable preview went through the sequence. Unless Im doing something wrong I dont know. Vixen also does not find any com ports on my windows 7 64bit pc. I need to just go back to square one and start over with everything.