PDA

View Full Version : Ren C Pic Programming problems



craftylag
10-09-2011, 08:02 AM
Using MPLAB IDE v8.76 with Pickit 2 Nd 627a chip getting error 113 at the build stage.

----------------------------------------------------------------------
Debug build of project `C:\firmware\pwm.mcp' started.
Language tool versions: MPASMWIN.exe v5.42, mplink.exe v4.40, mplib.exe v4.40
Preprocessor symbol `__DEBUG' is defined.
Sun Oct 09 07:37:37 2011
----------------------------------------------------------------------
Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "C:\Program Files\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F627A "Renard-595-192-20071211.asm" /l"Renard-595-192-20071211.lst" /e"Renard-595-192-20071211.err" /d__DEBUG=1
Error[113] C:\FIRMWARE\RENARD-595-192-20071211.ASM 80 : Symbol not previously defined (_DATA_CP_OFF)
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project `C:\firmware\pwm.mcp' failed.
Language tool versions: MPASMWIN.exe v5.42, mplink.exe v4.40, mplib.exe v4.40

I would appreciate any help or suggestions. Should have never moved past vacuum tubes. Thanks Terry
Preprocessor symbol `__DEBUG' is defined.
Sun Oct 09 07:37:39 2011
----------------------------------------------------------------------
BUILD FAILED

RichF
10-09-2011, 08:24 AM
Try this one. I have previously uploaded the ren-c firmware in a hex file all you need to do is put it on your chip.

http://doityourselfchristmas.com/forums/dynamics/showentry.php?e=129&catid=6

craftylag
10-09-2011, 12:02 PM
Try this one. I have previously uploaded the ren-c firmware in a hex file all you need to do is put it on your chip.

http://doityourselfchristmas.com/forums/dynamics/showentry.php?e=129&catid=6
Thank you Richf Don't know what was going on but using a hex file made it a lot easier. Thanks again