RGB flood sequences

[Daemon]

Hi
Anyone have any interesting RGB flood sequences I can play with?
Just built a couple to add to my display this year and besides simply changing colors on the wall I was wondering if there were and decent cross fading patterns that anyone has been using.
Steve

[Matt_Edwards]

Steve,
considering most use LED floods to highlight display items ( like say a nativity scene) or to colour wash a wall, I am not sure if you will get the sort of sequences you are looking for.

[Daemon]

I just wanted some smooth fades from color to color really because I have 2 floods and thought you could probably mix colors on the edges as it is pointed at the wall.
Plus I found that at certain dimming levels they turn off completely so I do not think I want to dim down to below say 25 percent.

[Matt_Edwards]

Plus I found that at certain dimming levels they turn off completely so I do not think I want to dim down to below say 25 percent.

That is not good. Mine dim from 0 to 100% as smooth as linear dimming allows. If yours quits at 25%, there is somethings else going on. you shouldn't blame the LED floods for that.

Are you using AC or DC SSRs?

[Daemon]

I was using a Tiger DC48SSR board to test it quickly.
Will have another bit of a test before too long and see if it's a consistent problem.