595 doubling

[finnegan]

hey using the latest release -im getting channel doubling,i can tick on or off individual channels but when i run like a 3channel sequence -i get the next three channels lighting up too ---any ideas??????

[Macrosill]

Port setting in the bios or the channel count in the plug in setup is only for 3 channels.

If it is the port setting in the bios, try all the settings. EPP seems to be the usual but not always choice.

In the Vixen plug in setup make sure you have the channel assignment for the whole board, not just 3 channels. If you only have the plug in set up for 1 to 3 then the board will just keep relaying the 1-3 info down the line. If you set up 1 to 64, for a coop board, then the chips will only turn on 1-3.