View Full Version : HELP! just hooked up my olsen coop (issue solved)
12-09-2007, 12:02 PM
installed all lights connected to olsen from puter. led lights on channel 1234and 7 stay lit. Don't know why! no xmas lights are lit either...
595 is not working other than led's ALL SSR's do have their led's lit.
any help appreciated!
12-09-2007, 03:25 PM
But only 2 ssr's are working and only half of those....
Not sure may hwat to make of this...
12-09-2007, 04:45 PM
Double check all solder joints, make sure chips are in the right way, and make sure you cable from pc to olsen is pined correctly
12-09-2007, 05:42 PM
i bought the ssr's from someone on the sight they said they checked the boards prior to sending...
i needed to solder the fuses on however. 1st time ever doin this... wasn't difficult though. took all maybe 30 minutes to do16!
cables I made and checked after each completion. Used a straight wiing system all the way thorugh and same wiring system on all strands.
used this site to assis t me http://www.lanshack.com/make-cat5e.aspx
used diagram b for all cables. i saw somehwre size of cables made a huge difference. could this also be the case.... This seems to be nice cable.
Thansk for yu help. Hope you can come up with more trials for me i am gettin nowhere fast
can't even rurn on my lights
from the pc to the controller how are you conecting to the parellel make sure you have the corect pins from the parellel conected to the controller
i am the one who sold it to him.... The adapter for parallel to cat5 is one Brian made. I tested most of the circuit boards before i shipped them, and they worked. Im really confused, but im thinking its a cable or voltage problem as two boards work, but only 1/2 of the board
12-09-2007, 06:30 PM
yep appear to be correct. all the leds go on at the controller 595 the ssr's are not all working only 2 of them are working.. and one is only half working.
tried taking a cable form another ssr to a working ssr and the cable worked the working ssr the non working ssr is still ot working,,,
only 1/2 on both boards?
the 595s arent backwards on the second 1/2 of the boards ?
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.