PDA

View Full Version : Homemade Pic Programming Board


slug
12-03-2010, 08:38 PM
I built a board a couple of years ago, based on some instructions I found at the time. If anybody knows of those instructions, can you point me to them?

I've got the PicKit2. I just want to verify that I have the wiring to the correct pins.

Thanks
slug
12-03-2010, 08:59 PM
Nevermind. I found it.
Wayne J
12-03-2010, 10:02 PM
Here is the one I made and use.
Ekuth
03-26-2011, 03:11 PM
WayneJ;

What's the value of the resistor shown between GRD and VDD?
Wayne J
03-26-2011, 04:46 PM
WayneJ;

What's the value of the resistor shown between GRD and VDD?

It's not a resistor, it is a decoupling cap. Not needed in this application, but it is the same one used in the Renard boards. Here is one part#... 80-C322C104K5R (though any of the ones listed in the BOMs of Renards will work if you choose to install it). I just through it in there for extra protection.
Ekuth
03-26-2011, 05:10 PM
Okie doke. Thanks!