PDA

View Full Version : Wiring Question



olingerjccj
12-02-2010, 10:48 AM
Ok I have my modified C-9 strands from my boards to there spots. Most of them are just the wire no ends. Now I am wondering what would be better. I have the lights then a extension cord so the light fuses still there, but on the female end of the extension cord would it be better to cut that off then splice the incoming wire or just add a male end to the modified c9 wire then plug in.


Thanks
John

olingerjccj
12-02-2010, 02:46 PM
well I am out to do this have the 3rd controller to wire, really is the same either way so I chose to trim off the female end of the extension cord and splice the wires on the sp-1,2 wire to the extension cord. May have this lit up tonight.

John