Ropelight connections

[Stevendi]

Can anyone in Oz help me to source ropelight connectors/end caps. Or give some advice on alternative methods of connecting power to them and closing the ends of the cut ropelight.
Gunna need them in a hurry too cos time's running out on me!

Thanks.
Steve

[jrock64]

Go to post #7 and follow the link

http://doityourselfchristmas.com/forums/showthread.php?t=11108&highlight=rope

Joel

[mmulvenna]

Go to post #7 and follow the link

http://doityourselfchristmas.com/forums/showthread.php?t=11108&highlight=rope

Joel

I just redid all my wireframes in ropelight. Had well over 200 connections using 2300 feet of rope and used a scracth awl to ream out the cut end of each connection wire in the rope light. I then tinned the end of spt2 and inserted them into the holes made by the awl. Then siliconed the end and heat shrinked it. Have not had 1 connection failure. I would highly recommend this process.

[toodle_pipsky]

http://www.santasledlights.com.au/

[artzy]

I use these guys and they have been pretty good too http://mytbritelights.com.au/led-rope-light

[Stevendi]

Thanks for the advice gang, been a great help.

Steve:D