PDA

View Full Version : Super Flux RGB LED Library


Ponddude
09-07-2010, 02:56 PM
Does anyone has an RGB Super flux LED library for Eagle? I HATE making new libraries in Eagle and was wondering if anyone was willing to share. I couldn't find one online.

Thanks in advance,
Greg
LabRat
09-07-2010, 03:33 PM
Does anyone has an RGB Super flux LED library for Eagle? I HATE making new libraries in Eagle and was wondering if anyone was willing to share. I couldn't find one online.

Thanks in advance,
Greg

The Piranha ones? I had one, but the colours didn't align. (Not a big deal for what I used it for). I can dig it out this evening.
Ponddude
09-07-2010, 03:42 PM
Yes, the Piranha one...sorry should have put that in there.

If you could I would appreciate it. I can screw around with it to try and get it to work.

Thanks!!!
LabRat
09-07-2010, 05:17 PM
Just checked the board I had done. The silk screen is 90 degrees out of alignment. So I had to rotate the parts by 1/4 turn (vs the silk screen) when installing. The library is on my "other" PC.. so will dig it out tonight.

http://doityourselfchristmas.com/forums/attachment.php?attachmentid=7462&stc=1&d=1283894169
LabRat
09-12-2010, 08:34 PM
Just found that I forgot to upload the file for you.

Here it is..

*HOWEVER* .. not only is it 90 degrees out of alignment, I'm also finding the pins have a very tight fit. I couldn't notice on the home-etch as I use a larger drill than the part requested. So that's two things you may want to address in the library before using it.
LabRat
09-12-2010, 08:38 PM
Actually attach the file.

:)