March 2010 Ren24 parts kit group buy

[cmitcham]

Group Buy Rules: (http://www.doityourselfchristmas.com/forums/showthread.php?t=2919) read before posting in this thread.

By participating in this Group Buy all participants agree to release www.doityourselfchristmas.com (http://www.doityourselfchristmas.com/forums/index.php), it’s owners, administrators, moderators or any other staff of any and all liability and waive all rights they may have under all laws and governing bodies. By posting in this thread you agree you are entering a binding contract between the organizer and the participant.

As per coop rules, this coop is limited to 50 participants or 150 part kits. If either of those limits are reached to coop will be closed.

Details as are follows:

This group buy is for the ren24 version 3.3 or 4.0 parts kits. I can program pics for anyone who needs it. Each kit will contain the BOM listed below.

This coop will end on 20 March 2010, or when the 50 participant limit or 150 kit limit is reached.

I will contact the participants with exact payment via pm prior to placing the order for parts. Payments can be made by check or PayPal.

Also if anyone will need the PIC chips programed before sending let me know when I send you the payment address.

Part kits will be shipped by Priority mail and shipping price quoted if for US only. Anyone wishing to participate in this group buy who does not reside in the United States needs to PM me for a shipping quote.

I will let each participant know their total due once the parts are on order.

As of right now it looks like this: (includes shipping to me & esd supplies)
Over 25 - 54.00 (+Shipping & paypal)
Over 50 – 49.75 (+Shipping & paypal)
Over 100 - 46.00 (+Shipping & paypal)

I ran 1 kit, it’s 73.94. This will save everyone 20.00 - 25.00 per kit.

I will ship USPS priority or flat rate. Shipping will depend on actual weight and location. It will usually runs around $10.


item quantity description
271-180-RC 24 180ohm 1/4 watt resistor
271-680-RC 29 680ohm 1/4 watt resistor
271-1K-RC 4 1k ohm 1/4 watt resistor
271-27K-RC 3 27k ohm 1/4 watt resistor
271-120-RC 1 120ohm 1/4 watt resistor
78-1N5239B 2 Zener Diodes 9.1 Volt 0.5 Watt
78-1N5229B 1 Zener Diodes 4.3 Volt 0.5 Watt
625-1N4001-E3 1 Standard Rectifiers Vr/50V Io/1A
581-SA105E104MAR 5 0.10 uF Ceramic Capacitor
571-1-390261-1 26 6 Pin Socket
571-1-390261-2 2 8 pin DIP socket
571-1-390261-3 3 14 pin DIP socket
520-TCF1843-X 1 Full Size Crystal Clock Oscillators DIP-14 5V 18.432MHz
604-WP63ID 4 Red T1 3/4 LED
604-WP1503GD 1 Green T1 3/4 LED
534-3517 4 Fuse Clips and Holders PC FUSE CLIP 5 MM
571-9-146281-0 1 0.100 three pin header(4 needed) Part specified is a 40 pin
571-2-382811-1 4 0.100 Shunt
571-2828376 6 6 Position Screw Down Terminal
140-HTRL25V10-RC 2 Hi-Temp Radial Electrolytic Capacitors 25V 10uF 105C
158-P02EK508A3-E 4 3 Position Angled Screw Down Terminal
571-5556416-1 2 RJ45 Sockets
511-L7805CV 1 LM7805 Voltage Regulator
511-BTA04-700T 24 Triac (4amp)
140-HTRL25V1000-RC 1 Hi-Temp Radial Electrolytic Capacitors 25V 1000uF 105C
158-P02EHK508V2-E 1 2 Position Screw Down Terminal
158-P02EHK508V3-E 1 3 Position Screw Down Terminal
532-7136DG 1 Heat Sink for 5V regulator
782-H11AA1 1 Optocouplers Bi-Directional Input
821-DB102G 1 Bridge Rectifier 1A 100V
838-3FD-320 1 Transformer
859-MOC3023 24 MOC 3023 Optocoupler
595-SN75176BP 2 RS-485 Interface ICs Bus Diff
579-PIC16F688-I/P 3 Microchip PIC 16F1688
504-GMA-15 2 5mm x 20mm Fast Acting Fuses 125VAC 15A Fast Acting

Please post in this thread the number of kits you want, and if you want the pics programmed. I will track the participant list and my updates in post #2.

[cmitcham]

participant list - reload this page in your browser to make sure you are seeing the latest chart.

http://www.calvinmitcham.com/pic.png

4/1/10 - i received the back-ordered part today, and shipped some packages. all remaining packages should ship tomorrow.

3/23/10 - shipping has started. i have a few more that can ship before i run out of angled screw terminal blocks. mouser has moved their expected delivery from 4/16 to 4/30. i really tried, but i can find no other supplier for these terminal blocks on the planet :(

i do need a favor. you will find some of your parts packed in tubes, just as they came to me from the supplier. i cut some tubes to break up the orders, and used tape at the ends to hold the parts in. before you pm or email me with parts shortages, make sure your part is not stuck to the tape at both ends of the tube.

3/15/10 - prices posted include paypal fee and shipping. send paypal money to calvin@calvinmitcham.com. chicken and international orders, i will get your prices posted as soon as i can get your shipping total. please make sure the paypal info matches your real name to your username, and shows me the shipping address.

3/12/10 - the parts are here. i am all about getting the lowest cost, so i was optimistic and ordered parts for 150 units. please tell all your friends about the 28 we still have available. the only (partial) back-ordered part is the angled terminal block, i got 485 and 115 will ship on 4/16. so the first 121 kits ship as soon as paid, the last 29 have to wait.

speaking of $$, within 1-2 days, i will see how many kits i can get in which size flat rate boxes, and post your totals in the chart above. i know and noted above the two orders that ship outside the usa. if i missed you, and you need shipping outside the usa, let me know.

free shipping to anyone who wants to pick up there kit(s) in oxford, michigan, and to anyone that wants to pick them up at light-up-ohio. unless there is an emergency, i plan to be there.

[kychristmas]

Since you helped me out by doing it before I did, Let me be the first participant.
I am in for 2 Kits

Thanks for doing it.

[sims101]

You can put me down for 2 please

[henkvis]

Great, I'm in for 5 kits !!!
Please read my PM to you.

Regards,
Henk Visser
The Netherlands

[BadWolf]

I would like two kits, no programming.

Thanks!

[folksy]

I am in for 5 kits with programming.

Thanks for setting this up.

[Dragon88]

Which Ren24 is this group buy for may I ask?

[folksy]

Which Ren24 is this group buy for may I ask?


This is parts COOP for Franks board

http://www.kostyun.com/current-projects/renard24/

[WarnTech]

I would like one kit with programming.

Thanks!

[theoldgeezer]

1 kit with programming.

Thanks

[davejackson]

I'm in for 5 with programming please.

Thanks so much for doing this. I have been waiting nearly 2 years, slowly collecting stuff (enclosures, PCBs, extension cords, ect). Electronics are the last on the list.

Dave

[kychristmas]

Which Ren24 is this group buy for may I ask?



This is parts COOP for Franks board

http://www.kostyun.com/current-projects/renard24/


The confusion sometimes is which of Franks boards. This is for Frank's Renard 24 HC. Either the 3.3 or 4.0 versions.

This is NOT for Frank's Renard 24 LV board. If you need that Richf is currently running a co-op for that.

Kelly

[zztopmo]

I would like to have one with programing please.

Thanks

Rick

[Skunberg]

skunberg 2 kits PWM

Thank you. Let me know if you need any help.

[Musicman]

Put me down for 6 programmed please.

Thanks alot

Ron

[will3ishere]

i am in for 2 kits no programming thanks

[Dragon88]

I am in for 5 programmed

Thanks !

[KFXI]

2 please programming yes

can you post how to obtain PCB and case

[cmitcham]

the board - http://www.doityourselfchristmas.com/forums/showthread.php?t=10844

an enclosure that fits great - http://www.yourbroadbandstore.com/product.php?pid=706098

[rstehle]

The Ren 24 also fits well in the CG-1000 (http://www.yourbroadbandstore.com/product.php?pid=201838), and it will save you a couple of bucks. There is still free shipping on any order over $75.00, and you get a DIYC discount if you call your order in. (Be sure you mention that you are a member).

[reasonforseason]

3 with programming please.

thanks for doing this.:D

[mlyons1957]

I would be good for 4 with programming.
This is my first on a coop.
Where do I find the BOM?
What else do I need to do?
XMark

[RichF]

BOM is in the first post of this thread. YOU will need to have the boards to put the parts on to as this is for the parts only.

[cmitcham]

the bom is posted in the first post of the thread.

you need printed circuit boards, they do not come with the parts kit. there is a group buy for them going on now, at http://www.doityourselfchristmas.com/forums/showthread.php?t=10844.

other than that, just wait till the coop is over, and i will post the exact costs with shipping.

[davejackson]

I would like to add one more kit with programming to my "cart". I have a friend who wants to build one. This will bring my total to 6 kits. Thanks

Dave

[Gandalf143]

I'm in for 2, programmed.

Thanks!

[henkvis]

Yes -> you reached 50+. Great already!
Hope you will reach 100 soon :D

[Stoene]

Hello,
I would like one kit with programmed PIC. Thanks

[chicken]

Count me in for 30 kits. No programming needed.

[caviar]

I would like 4 parts kits, no programming, thanks.

Kevin

[oldgezzer]

I need one kit with program please.

[maffeirw]

Please put me down for 5 parts kits, no programming needed. Thanks

[chicken]

cmitcham, I think that puts you at exactly 100 with your and my order. Congrats on what looks to be a sucussful start to your first GB. Thanks for organizing it. For those of you that are thinking of getting in you better hurry up as we are 2/3rds of the way to the 150 kit cap.

[LightOut]

I am in for 2 kits with programming please. Thanks for organizing!!

[christmas-light]

Hi

I need to ask you a question.... When do we pay ??

I need to know which month we pay, because then I have some to calculate on :D

C - L

[steve_hirst]

after you order he will send you a pm with the total and then you pay. so I guess the answer would be this month.

[christmas-light]

after you order he will send you a pm with the total and then you pay. so I guess the answer would be this month.

Thanks :p

[cmitcham]

frank's board coop ends tonight, but as of now, his store still has ren24 boards.

there are about 50 parts kits still available in this group buy. :)

[KFXI]

Does the bom include heat sinks?

Kfxi

[RichF]

I do not see heat sinks for the traics listed on the first post so I do not think so but even so heat sinks can be found in your home depot, lowes or favorite hardware store in the bare aluminum stock section.

[RichF]

Is it to late to get in on this group buy?

[Mudsculpter]

I believe the ending date is 20Mar2010 unless the date has changed somewhere in the thread

[Mudsculpter]

Add me to the list for 2 kits please,...no programming

[Braveit1]

I need 10 kits. Programmed if no additional charge. :)
Thanks.

[cmitcham]

post #2 updated

25 people spots left
44 kits left
16 days left

thanks folks, i am usually available on live chat evenings between 10 and 11 EST, but the wife says there is no cable or internet at home today :(

hopefully it comes back on

[christmas-light]

I take 6 part kit, no programming thanks.

Please PM me with total price, with shipping to Denmark :D

Christmas - Light

[Helenaguy]

I would like two kits with programming please, if I'm not too late :cool:
Thanks!!

[cmitcham]

... and the counting begins...

28 kits still available!

[RichF]

Are you sorting parts on your birthday?

[marble42]

if you still have them i'll take two(2) kits with programing please
let me know what the cost is

[cmitcham]

post #2 updated with prices. as soon as i figure out what box(es?) will hold 30 units, i will post your price chicken. also, international orders will post as soon as i get shipping cost.

our per kit cost came to 41.69. i added .56 for labels and supplies for a kit price of 42.25. orders of 1 kit fit in a small flat rate box ($4.95), but 2 kits do not. the medium box ($10.70) easily holds up to ten kits, but i'm not sure yet about 30. and as always, paypal wants 30 cents plus 3%.

paypal me at calvin@calvinmitcham.com before the credit card bill gets here and the wife kills me.

we do have a partial back-order on some of the terminal blocks that will ship to me on 4-16, so if you know you will not get to building before then, please volunteer to wait till then for shipping.

26 kits still available, as our group buy is open till 3-20-10. tell your friends.

[Musicman]

You got money, thanks for the order!!!!!

[caviar]

Money sent for 4 kits. I forgot to put my DIYC user name on the paypal payment.
Kevin Harden = Caviar

Sorry!
Kevin

[folksy]

Money sent for 5 kits plus shipping. Feel free to delay my shipment until the other parts are received on 4/16.


Jason

[davejackson]

Payment has been sent for my 6 kits plus shipping. Thanks again for doing this.

Dave

[will3ishere]

payment sent thanks you the man;)

[WarnTech]

Payment has been sent.
no hurry, you can ship mine when the backordered parts arrive.

Thanks for organizing the group buy.

[pblais]

Hi...
If it is not too late to get in to this, who do I see to find out how much a kit costs and who to pay?

THanks
Pierre

[reasonforseason]

Thanks cmitcham,

Payment sent and I don't mind waiting for back order.

[Gandalf143]

Money sent for 2 kits. No rush, so send complete. Thanks!!

[Dragon88]

Money sent for 5 kits

Thanks

[theoldgeezer]

Payment sent for 1 kit. No rush.

Thanks.

[henkvis]

Payed partially and in a rush, so please ship when available.....

Thanks for all your hard work !!!

[cmitcham]

henk, you are boxed up (except for the boards from frank) and i'm getting your shipping cost today. tonight, your total will be posted, and i will pm you.

thanks!

[LightOut]

Money sent for 2 kits. Thank you again!

Edit: No rush. :)

[pblais]

Hi Calvin

I want to buy 2 of the Ren24 kits. But, I have two questions.

1) In your spread sheet you have a "pwm program" column. I would like my PICs programmed but what does PWM programmed me as a uposed to what?

2) I have never sent PayPal payment to someone before who did not have a "click-and-pay" setup like on Ebay... I see your email address but I have not clue as to how to get the payment over to you.

Here is my email address in case you have time to drop me a note
pblais@comcast.net

Thanks in advance
Pierre

[cmitcham]

pierre - email on the way!

everyone else - everyone's price is finally ready in post #2. look there and make sure what i have looks good. sometimes i have to hit re-load in my browser to make sure the latest version of the picture shows up.

make sure again that your paypal receipt shows me your diyc name and your shipping address.

looks like some of you borrow your wife's paypal account. that is fine, but be nice to her so when the parts come, she will let you have them :)

i'm usually on live chat 10-11pm edt if you want to talk to me.

2 days left, a few kits still available!

[christmas-light]

henk, you are boxed up (except for the boards from frank) and i'm getting your shipping cost today. tonight, your total will be posted, and i will pm you.

thanks!

And for me ?? :p

[pblais]

Hi...
Even though I indicated it in our email, I want to make it official by posting here.

Put me in for two with PWM programmed PICs...

Thanks
Pierre

[cmitcham]

christmas-light, your total is posted.

pblais, you are in.

[Stoene]

Money is sent. Thanks

[Braveit1]

It's Friday! Pay-Pal sent.

[dehaggard]

Please put me down for 4 kits with programing if I am not to late!

Danny Haggard

[pblais]

Its Friday 5:30 PM EDT...
Paypal money sent...

thanks

[henkvis]

2nd payment is done!

Thanks and regards,

Henk Visser

[zztopmo]

Do you have any left?

Rick

[mlyons1957]

You've been PayPal-ed.
Ill take another kit if available.
This would make a total of 5.

[Helenaguy]

Paypal sent! No rush for me.
Thanks for doing this coop!:p

[rovingmind]

i know today is listed as the last day of the coop, no time was posted. Can i get in for 1? I would need the PIC programmed.

[Slashdude]

I am interested in 10 kits pending the PCB's being available.

[chicken]

Payment Sent. Thanks!!

[pblais]

Hi...
I have a quick question about the Ren24 boards.

Do they have provisions for In Circuit Programming with my Microchip ICD2?

Thanks

Pierre

[rstehle]

No, there is no programing header on a Ren 24. The PICs must be removed to be flashed.

[cmitcham]

wow, last minute rush!

i'm pretty sure all that have asked can be covered up to this point, but it wont go much further, so get your orders in this thread

zztopmo, you are in for 1, are you wanting more?

thanks everyone, i think alot of boxes are going to the post office monday!

[chicken]

your wife must be happy all that stuff is getting out of the house :)

[dehaggard]

Paypal Sent! Now I just need to get the boards on order, hopefully the store will be back online soon!.

Danny Haggard

[cmitcham]

i know today is listed as the last day of the coop, no time was posted. Can i get in for 1? I would need the PIC programmed.

you're in.

[frankv]

I've just realised that this coop might be applicable to me.

So if this board will work at 240V (the Wiki doesn't mention any 240V Renards), and it's not too late, I'd like to be in for 2 kits plus programming.

[cmitcham]

I've just realised that this coop might be applicable to me.

So if this board will work at 240V (the Wiki doesn't mention any 240V Renards), and it's not too late, I'd like to be in for 2 kits plus programming.

you can power this controller with 240v, so i added you to the list. see post #2 in this thread.

thanks!

[marble42]

payment sent via paypal for 2 parts kits
thank you

[rovingmind]

payment sent for my 1 parts kit. now just need a board

[frankv]

Payment sent for 2 kits.

[pblais]

payment sent for my 1 parts kit. now just need a board

WHOA!!!!!!!

THis doesn't include a PCB?????????

[Braveit1]

WHOA!!!!!!!

THis doesn't include a PCB?????????

None of the parts group buys came with the PCB's. They are not listed in the BOM.

You can contact kostyun to see if he has any extra PCB's left over from his group buy. His store address is http://store.kostyun.com/ but it is closed until the PCB from his order arrive. The PCB group buy thread is located at http://doityourselfchristmas.com/forums/showthread.php?t=10844.
Hope this helps.

[cmitcham]

WHOA!!!!!!!

THis doesn't include a PCB?????????

i sent you a pm. and you can catch me on livechat now if you want to.

[rice66]

Hey, it was Christmas in March, at my mail box yesterday the 25th, thanks cmitchum
great job. Thanks for the prompt mailing. Everything in the box looked in great shape. Didnt inventory, but trust you counted everything properly!
best wishes for a blinkly flashy dimming light experience
Regards
Rice66 aka Charles

[davejackson]

Got mine yesterday also. Wow!! Speedy! Everything looks great. Thanks again for doing this. I can't wait to get soldering.

Dave

[cmitcham]

Hey, it was Christmas in March, at my mail box yesterday the 25th, thanks cmitchum
great job. Thanks for the prompt mailing. Everything in the box looked in great shape. Didnt inventory, but trust you counted everything properly!
best wishes for a blinkly flashy dimming light experience
Regards
Rice66 aka Charles

thanks for the vote of confidence, but i'm going to go ahead and suggest we all take some time while we wait for the boards and go ahead and check the contents of our boxes against the packing list.

...and go ahead and get those tps reports done too.

[maffeirw]

Received on the 25th. Everything looks great. Thanks again for putting this group buy together.

[rice66]

ojk, wioll inventory the 4 sets tonight Sat the 27th
Regards
Rice66

[pblais]

yayyyyyyyyyyyyyyyyyy

I got my 2 kits today... but no boards to put them on :(

[Dragon88]

Same here, waiting for the boards.

Thanks.

[zztopmo]

wow, last minute rush!

i'm pretty sure all that have asked can be covered up to this point, but it wont go much further, so get your orders in this thread

zztopmo, you are in for 1, are you wanting more?

thanks everyone, i think alot of boxes are going to the post office monday!

yes sir and you have been Paypaled. No rush until order is complete.

thanks

Rick

[cmitcham]

Dear Calvin Mitcham ,

Your account access limitation cannot be lifted at this time. We require
proof of delivery for the following transactions received into your PayPal
account. You can log in to your PayPal account and go to the Resolution
Center to provide this information. Please include the delivery
confirmation tracking number for each of the transactions below. We can
review your case and the tracking information further once the items show
delivered.

Transaction ID: 2CK81750D3458062U
Transaction ID: 84660629D3915982S
Transaction ID: 5GP6646295881470X
Transaction ID: 2GU18258713102749
Transaction ID: 6XV42389GX518223L

Pre-sale items are items advertised for sale before the seller has control
or possession of the items. These generally consist of items that are sold
prior to the item's availability to the general public, or that are sold by
the seller with the intention of using the payment to go out and purchase
the item being sold.

PayPal does permit pre-sales on a limited basis, as long as the seller
guarantees and reasonably expects that the item will be shipped within 20
days from the date of purchase, and that he clearly informs the buyer that
the item is a pre-sale item.

so, in a nutshell, paypal will not let me have any of the money you folk have sent me. the only way to get any money to help pay my credit card bill in a couple weeks would be to refund the paypal payments for the packages that haven't already shipped, and you send me a check. that would only net me about $1500, so we're not going to do that.

richf has found the angled terminal blocks for me, so i don't think we will be waiting for the april 30th parts, so if i can get them and ship this week, maybe i can have tracking numbers that satisfy paypal by the middle of april. if not, i assure you my wife will kill me.

[rice66]

Paypal shows the money I sent to you was sent and completed. I trust I am ok, since you havent refunded any paypal transaction.
Sorry your having these problems (kinda makes one think twice before they do ad group buy huh), in any event, If you have to refund my paypal, no problems, I would transfer the money to my bank account and then send you my personal check.
I truly thank you for your efforts
Regards
Rice66

[cmitcham]

ok, i am still shaking, but a little calmer already :)

don't anyone worry about refunds, in fact the two of you who haven't paid can go ahead and use paypal.

the couple of you who have mentioned wanting extras, firm up your plans via email or pm.

the part we are waiting on should be in my hands this thursday. eight minutes after i get them, they will be in your boxes headed to the post office :)

33 minutes after i get them, they will be behind the counter at the post office, and i will have the usps tracking number for big brother paypal. within 4 days, when the tracking number says delivered, big brother should let me have my money.

if all that works, i should live to see this summer :)

[RichF]

Did you account for the time you will be stopped at the 3 stop lights between your house and the post office? :) Glad to hear your calmed down.

[mlyons1957]

Parts in on Monday 3/29.
Not yet inventoried.
mlyons1957

[chicken]

Parts arrived but I have not counted them yet. Will do that in the next day or two. Let me know if there is anything I can do to help. Thanks Chris

[cmitcham]

that's alot of counting. make all those you are building for come help :)

[chicken]

yah we are looking for cheap labor right now :o My brother is going to help as a bunch of them are for my parents setup who are still on some old 555 boxes I built 12+ years ago.

[cmitcham]

PONTIAC, MI, US 04/01/2010 7:33 A.M. OUT FOR DELIVERY

looks like i will have our angled screw terminals today. the three packages paypal wants to see shipped go out today, hopefully everybody else tomorrow.

thanks everyone, especially chicken, for making our ren24 parts almost half the mouser price for one kit!!!

[fathead45]

still waiting on mine:(

should be here tom i would think. thanks again rich.

[Skunberg]

PONTIAC, MI, US 04/01/2010 7:33 A.M. OUT FOR DELIVERY

looks like i will have our angled screw terminals today. the three packages paypal wants to see shipped go out today, hopefully everybody else tomorrow.

thanks everyone, especially chicken, for making our ren24 parts almost half the mouser price for one kit!!!

And you were worried about keeping up with WakeFan :D

[theoldgeezer]

Mail person just came. Have not checked them yet.

Thanks for all the hard work.

[theoldgeezer]

All present and accounted for. Now I just need to have some eye work done so that I can actually tell one part from another.

Thanks again.

[christmas-light]

Got my parts here in Denmark to day, Thanks for this great group buy :D

C - L

[KFXI]

received my two kits today, now can anyone tell me where to find the assembly instructions

Ken

[dirknerkle]

received my two kits today, now can anyone tell me where to find the assembly instructions

Ken

The Wiki is your friend. This will get you going -- there's a link to Frank's site...

http://www.christmasinshirley.com/wiki/index.php?title=24_Channel_Renard_with_SSR_Assembl y_Instructions

[RichF]

Check the WIKI under the Renard 24 w ssr



Renard 24 Assembly Instructions Avalible at the link below
http://www.kostyun.com/PDF/building_ren_24.pdf

[cmitcham]

received my two kits today, now can anyone tell me where to find the assembly instructions

Ken

ken:

somebody at your house must be hiding stuff from you :)

Detailed Results:
Delivered, March 29, 2010, 10:25 am, XXX
Notice Left, March 27, 2010, 10:13 am, XXX
Out for Delivery or Available at PO Box, March 27, 2010, 8:45 am, XXX
Sorting Complete, March 27, 2010, 8:15 am, XXX
Arrival at Post Office, March 27, 2010, 7:24 am, XXX
Processed through Sort Facility, March 26, 2010, 11:52 pm, XXX
Processed through Sort Facility, March 25, 2010, 6:36 pm, ROMULUS, MI 48174
Acceptance, March 25, 2010, 3:16 pm, AUBURN HILLS, MI 48326

this link goes staight to the assembly instructions:
http://www.kostyun.com/PDF/building_ren_24.pdf

check your parts kits while waiting for the boards to arrive :)

edit: yea, the link richf said, he is quite on top of things, and is the one who found angled screw terminals for us, or some of us would be waiting till may for parts :)

[rice66]

Say, Do you happen top have an extra parts kit?
Thanks
Rice66

[KFXI]

Sorry but I only have the two, do you know where there is a parts list for the kit and does anyone sell heat sinks

Ken

[RichF]

Parts list for the coop is in the first post.

heat sinks if you feel you need then are in the fastener isle at your favorite DIY home repair store. Look for 1" Aluminum stock.