View Full Version : Does anyone have an extra 25 feet of cat5
free2hate990
11-09-2007, 10:31 PM
does anyone have an extra 50 feet of cat 5 and the connectors that make it hook up to the printer port they could give me a good deal on this is my first year doing this and im very low on money cuz im 13 and money doesnt grow on trees
please help
I've got several at 20-30, just remnants. If anything dies this year, it will be a struggle to replace it, I've got several that are 70-100 feet long in the yard. I'm thinking I'll need to order another batch at some point. I wouldn't be able to get it to you for a couple of weeks (that is, anything longer than 30)... so I'm probably not your best bet.
free2hate990
11-10-2007, 09:45 AM
50 feet was so i could have some give well its to much give alls i need is 25 feet also how much would it be and do you have any extra rj45 and the other connector i forget what its called
will the cat5 come pre crimped cuz i dont have a crimper
Wayne J
11-10-2007, 10:00 AM
Have you checked the local stores to see if you can pick up what you need? 50' lengths w/ ends are really cheap.
free2hate990
11-10-2007, 10:48 AM
that i have no speacailty stores around here only big corporate so everything is priced so damn high
Mudsculpter
11-10-2007, 10:54 AM
Cat5 patch cords can be found at Walmart and at Home Depot and Lowes
free2hate990
11-10-2007, 10:56 AM
they are a t walmart for 20 bucks
grages
11-11-2007, 10:53 AM
I don't know where your at but mpja is cheap and shipping to me isn't bad either.
In blue, yellow and grey
25 ft $2.99
50 ft $5.49
100 ft $9.99
http://www.mpja.com/products.asp?dept=223
Oops, this probably wont work for you they have a $15 minimum
that i have no speacailty stores around here only big corporate so everything is priced so damn high
Look in the yellow pages of your phone book and find a local independant computer shop.
TED
charmz
11-12-2007, 06:12 PM
but ron actually hooked me up with some
but thankyou again everyone
does anyone have an extra 50 feet of cat 5 and the connectors that make it hook up to the printer port they could give me a good deal on this is my first year doing this and im very low on money cuz im 13 and money doesnt grow on trees
please help
Hey man, I'm 14 I know what its like! I need to build a new controller (going to work on a hill 320) and 5 SSR's on about $50!
Ben
RavingLunatic
11-17-2007, 10:48 AM
Ben,
If you are trying to get started on a small budget, try a Grinch first. A Grinch will give you 64 channels (expansion for next year), you won't have dimming or on-board LEDs but you will have ON/OFF blinky-blinky. :D
wjohn has the bare pcbs or check-out the Buy/Sell/Trade area.
Ben,
If you are trying to get started on a small budget, try a Grinch first. A Grinch will give you 64 channels (expansion for next year), you won't have dimming or on-board LEDs but you will have ON/OFF blinky-blinky. :D
wjohn has the bare pcbs or check-out the Buy/Sell/Trade area.
thanks but I am going with the 595. I got some advice in the chat area and I know have a gameplan!
Ben
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.