- Renard Archives
- First Renard related post.
- 64 channel Renard board Update
- Renard Forum locked down
- 8 channel Renard
- Potential Power Savings with Renard
- Question about the renard with the 16 channel ssr built in
- Renard8 -> Xmus16
- Connecting the Renard64
- Latest protocol specs
- Transformer Board - Connecting the Renard64.
- REN-C Beta Board COOP
- BOM changes for Renard8 and Renard64
- Renard Power Consumption
- Renard PWM not trigering Zero cross SSR
- Programming a 16F688 PIC
- Ren-C and Ren-T - Compatible?
- Pictures/Videos of REN-C in action
- REN64 power
- Zero Crossing detection mehtods
- General Renard Information
- Very confused
- Ren-T (The transformer board) package.
- Testing the PIC after programming
- PIC programming using MPLAB
- Lamp Brightness Issues
- Some questions (Chips, Internal OSC, PCB Designs)
- Renard8 - revision XB candidate
- Would this work?
- Renard 64 assembly
- REN-C
- Wiki Error
- Flashing during ramp
- Renard Melted
- Procrastinator in need of advice
- Power Connector for Renard64
- Join channels for more amps
- Enclosure for REN16
- Trying to be smart like you
- Renard troubleshooting
- More Renard/Ren-T troubles
- Please post pictures of your assembled Ren64's and RenT's
- Ren-C & Ren-T suggestion
- Ren64 power
- Wireless RS-232
- In line fuse for Renard DC supply
- Renard Osc
- Please suggest alternatives, the following are backordered
- Renard 64 times 2 Enclosure
- XMUS Renard 16 Troubleshooting
- Renard64 Futures
- renard 24 led install?
- Question about PIC programmer
- Does Renard send high or low signal to the SSR's.
- New renard design - Renard X
- Renard 64 assembly questions
- It Works!
- RS-232 on Ren64
- Xmus Renard 16 assembly update
- Some Channels Not Turning On - Random
- pc to ren64 serial to rj45 conection?
- Backordered part substitution needed for ren 24
- XMUS Ren16 - Amps per channel
- Renard 24 assembly question
- Automatic Fade-to-Dark
- Programming PICs with PicKit2
- I thinl I am lost?
- Getting signal to renard24 with ren-t
- XMUS - 16CH Renard no-worky
- Look!!! This Renard 24 is (FIXED)
- Renard24 firmware choices
- Renard 24 diagnstics help
- zero crossing?
- DUH it just dawned on me R64 & 595
- Hi there - 2 questions - LED polarity and troubleshooting?
- Renard 24 & 64 and PIC help.
- Question on some parts i just picked up for the Ren-T
- pwm code?
- Ren64 Alive!!
- Xmus Ren16 connections
- Zero Crossing help
- Renard Sequencing (Why you shouldn't use 25mS)
- Help with Renard 24
- Renard->Dont run strobes 100% duty cycle through a show
- Wiring the transformer to the Ren-T
- What changes are needed for XMUS 16CH in Australia?
- Ren64s not working
- double ramps - where to start troubleshooting.
- Daisy Chain Ren-C
- xmus-16 troubleshooting advice
- Help! Can I program a 16F627A???
- XMUS16 Framing errors
- Can't get Ren-C + Brian's 595 to work - any suggestions
- Thanks
- renard 64 question
- Finally Renard 16 up and running, stupid on my part
- Channel 8 is randomly on when it shouldn't be
- Somewhat working - but a weird problem
- Rec-C problems
- Overall, it doesn't seem to work
- Help with RENARD 16 with Integrated SSRs
- Accidental Short
- Driving RS485 separately from the power supply
- Renard 64 -- What am i doing Wrong
- Connecting REN16's together?
- Dang flickering
- Renard64 dosn't work?? help!!
- Renard Chaos
- Ren24 serial cable not working
- renard coop pcb
- turning ASM files into HEX??
- 12vdc Power Problems
- Power indicator for 120v
- Where to buy?
- Renard 16 dry location mounting method
- PCB information on Renards
- it worked great! Until I got it outside...
- Renard 64 - "Oscillator"
- Ren64 Problem - Please help
- Ren 24 questions
- Laggy Choppy Ramps are back
- Keep port open, Problem
- Renard 64 channel test glitches
- Ren-T Design Question
- Renard questions from a newbie
- Renard 16 Dimming problem
- Renard ZC question
- how does it work
- Does anyone sell the fully assembled Renard?
- Issue with channel mapping/flickering
- Help with my renard 24
- H11AA1 at mouser out of stock
- sorta newb switching from LOR to Renard
- Help....board out of service
- Deleted because of how hard brian is laughing at me
- Part is discontinued, what is everyone using now?
- Renard 24 COOP?
- 64 of 128 channels stuck on?
- Schematic for Ren 16
- System specific sub-forums
- Thank you EVERYONE!!! 64 Channel online
- Newbie Renard Question
- converting the Ren16 to a Ren8
- Did any one run faster than 57600 baud
- Cost breakdown for Ren 24 as of 12/26/2007
- Potential Renard64 Changes
- Total newbie needs lots of help!
- Renard16 question.
- Ren-16 and Ren-24 Compatibility
- Need advice on upgrading for next year
- Accidentally ran 12vdc to Ren64 - broke it - need help
- Do you have some REN16 heat sink pictures?
- RenC PIC Programming
- Comminicating with Ren C
- starting this for Xmus to answer my questions (he told me)
- Ren-64 chaining
- RenT - What is Zero-Crossing?
- Renard power question
- Ren16 Parts x10
- Renard packet protocol questions
- Variable time slices?
- Is a "feedback loop" feasible?
- Ren-C Help please
- Ren64 questions
- Renard 128?
- Renard PCB in Bazooka form-factor?
- R-24 cat5 issue
- Newbie
- PC-less Renard system?
- Ren-C questions
- Renard Help
- R-24 set to 120vac
- Noob Question! I guess I am confusing myself!
- Ren16 Safe Load
- newbie with ren24 questions
- Quick Ren 24 Questions
- PC to Renard64 Cable
- Some Help PLEASE
- PC to Renard 24 V3.0 pinout?
- New to Renard 64 Help please
- Ren-24 terminal blocks
- R64 after R24 for ZC
- Chaning TO Renards - Lots of Questions
- First Blinky Flashy EVER!!!
- Power to REN-C
- Renard64 xc
- Starting small
- Ren-C problem
- Ren16 BOM questions
- Help Dimming a 595 (Ren-C)
- Ren16 oscillator question?
- REN-C inop
- Ren-C Alternative Part
- Renard Hook-ups
- Ren16 part pricing
- rs232 to rs485 converter
- REN 64 Help
- Grinch + Ren C + Ren T?
- Ren-C issues
- Ren-C, Ren-T Op!
- Ren16 DC Power
- Another newbie idea
- Building 3 renX
- Ren64 vs Ren-C + Grinch
- Ren24...Coop
- Comm Ports
- Ren XC - assembly problem
- Ren24 and MR16 LED Floods
- Ren24 question....
- DB102 for ren24
- Ren 24 and heatsinks
- Ren-C Baudrate
- Ren XC need more help...
- Ren64 XC5 build
- Ren-C No-go
- Zero Cross Generator for Ren-C and Ren64 XA-XB
- First REN64-XC build successful!
- Self etch Ren16
- Ren24 v3.0 Questions
- OK - I'm No Wayne James, But Hey!
- Did I miss something?
- Six pin socket desoldering - Ren 24 H11AA1
- Ren64 XC5 questions
- Ren24 problems
- Ren24 Spade Connectors
- Ren 24 - wiring options
- Ren 64 XB question
- Terminal Options for the Ren24
- Best Renard Deal?
- Renard 24 Transformer
- More sensitive optocoupler?
- Length of Output Cords
- Renard 24 v2.5 Troubleshooting..
- Ren24 v3 Current Observations
- Renard 24 - accessability of H11AA1
- Questions about fimrware
- Backorder on 27K Resistors
- Ren-24 Heat Sinks
- Ren16 possible short?
- REN-C question
- Brand New Ren 16 Acting Strange
- Ren15-next troubleshooting step?
- Questions on Xmus Sell-off stuff
- Ren16 BOM typo
- REN-16 Board Fix instructions
- Express PCB
- REN64 XC -won't work unless 2nd in line?
- Anyone have a schematic for the XMUS Ren16?
- Renard 24 LEDs
- Instead of blinky flashy I got poppy sparky