Activity Stream

You mentioned an 8 channel? Still available? Otherwise what’s left?

I hadn't seen that segment before, that was one of the better shows I have seen on GCLF. Back to the OP. I fit 10 RBL in a 20x20x14 cardboard...

Before looking into your arguments, I'd like to know what you're trying to achieve here? I'm not sure if you what me to get rid of the isolation...

I'm pretty sure this video starts with them right away. https://vimeo.com/495923209 looks like the 8' one with the number of layers, i think it...

I too don't care what connectors come with my pixels, I either use the supplied connectors to connect strings on a permanent basis, or I simply cut...

Never would have guessed thats what those were. But now that i know, i see it Thanks

Right on! Saved on buying new and the feeling you fixed it yourself is priceless.

Thank you for the responses. Now that the season is over, I can experiment.

Sorry, I think I misspoke. I meant that the load on the circuit was 5a past the buck converter (~ 100 pixels). I'm trying to get my nomenclature /...

Yes you can run both on one network. However your explanation behind it is incorrect Regardless of multicast or unicast, the sACN data is sent...

Awesome thanks! Save a few bucks on the thinner wire. Sent from my iPhone using Tapatalk

The power lines benefit from larger gauge wires. The data wires don't need large size. 22 or 24awg is fine for the data and it's ground reference. ...

Okay great even better! I just assumed since that’s what most strings used so thought it should match. What gauge are the pigtails? I’m going...

I run both with multiple E6804s and E6802s. I started out 10 yrs ago all multicast when I did not understand unicast. I switched some to unicast to...

I don't think that you have to worry too much about the caps if it's just sub-zero. And I was under the impression that Rochester, NY doesn't go...

Good Job!

how much to ship 1 to 11801 in New York?

I don't know man, I saw some guy pretty much give away his stuff here. lol

Any photos? Jimboha

Yep, those DIYC soldering skills have given you confidence that anything can be fixed !

a bit of overkill but it will work. i use 22awg wire for 10m runs with no issue

Any reason I couldn't use 18G / 2 Copper Monoprice speaker wire to run just the Data / V- to the first pixel? ...

Sort of. You place too much emphasis on the SD card. It is the FPP Master/Slave protocol that matters and the FPP Master/Slave protocol only works...

For a run that long I would put a PSU closer to the prop. There is far less loss on an AC line. If you want to use a buck converter I would use a 24V...

Have you considered creating TWO shows, one inside and one outside. Then having two FPPs, one master and one remote. So the same song plays, you...