Activity Stream

Thanks Ritchie, I bought a USB-FTDI-DMX thing for about 20 euros, hope it works when I get it. Really hoping I can fully marry together ws2811 and...

I built an 8 x 8 x 8 RGB cube - everyone who visits our house says they want one but I say 'no' because there aren't enough hours in my life. It's a...

It will work with QLC+ yes, I have that too. I use QLC+ to get the channel values I wanted to use in Vixen, since you can control the heads with a...

https://github.com/mrfaptastic/Glediator3

Do you recall where you got the first card?

I just saw this on xLights FB page and thought I would share it with y'all. ...

Last year I reworked my Desk (Test) set up. I figured it was not going to be out in the changing temps in the yard so I tried a off brand SD card. ...

I'm not so sure.. I dont believe I included late lastnight as I was still working on it that the card with version 4.6 wouldn't even boot up for me...

There is another piece of software for matrix control called "Jinx". http://www.live-leds.de/

those are known as 3:1 WS2811 pixel strips. Three TRI-Color LEDs attached to a ws2811 driver chip.

Would something like this work with ESPixelstick? https://a.co/d/fJHIHDJ I'm looking for cheap/simple pixel options for my props. Preferably...

OK so I cant read. I found the issue in that I changed the Preview setting to 'All Previews' and that seemd to do the trick ... now I can continue...

SO I got PEAKS to work, but the ALL does not... Is there a restriction to the number of layers?

Do you all use anything like QLC+ for DMX, or just Vixen and Xlights? I'm researching whether the FTDI-to-DMX USB dongle going to QLC is a good...

Thanks folks. BTW - I like the cube sitting on its corner. :thup2:

I seem to remember something like that from RonP5683 over on the Green Site. You may want to PM him over there.

www.instructables.com/Simple-Arduino-RGB-LED-Cube-3x3x3/

My college project from Digital Logic 3429 class?

Could be cracked solder joints or even an insect in between the PCB and plate insulator.

I do what I call a "Bulb Check" walking around my house and yard with my phone using FPP test function. I turn AC Models on Individually or as a...

I like that. I have a really large Costco one that holds a string of large lights between it's arms that that would look good on.

That is what I do only I use my phone to run tests and sequences, but I'm using a Pi Player and not PC direct. I also have a tablet that makes it...